Teac DV-W50DK User Manual

Manual is about: DVD±R/DVD±RW Drive

Summary of DV-W50DK

  • Page 1

    Dv-w50dk dvd±r/dvd±rw drive user's manual ® to ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest teac sales representative..

  • Page 2

    • copyright © 2003, teac deutschland gmbh. All rights re- served. First edition: june 2003 • company and product names provided herein are trade- marks of their respective companies. • changes in specifications and features may be made with- out notice or obligation..

  • Page 3: English

    25 english contents contents to the user ................................................................................ 26 safety considerations relating to the fcc rule part 15 .......................................................................................... 27 declaration of conformity ...

  • Page 4: English

    26 english to the user to the user this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against interfer- ence in a residential area. This device generates and...

  • Page 5: English

    27 english safety considerations relating to the fcc rule part 15 safety considerations relating to the fcc rule part 15 declaration of conformity model number: dv-w50d trade name: teac responsible party: teac america, inc. Address : 7733 telegraph road, montebello, california, u.S.A. Telephone numb...

  • Page 6: English

    28 english safety considerations related to laser products safety considerations related to laser products this product has been designed and manufactured according to fda regulations „title 21, cfr, chapter 1, subchapter j. Based on the radia- tion control for health and safety act of 1968", and is...

  • Page 7: English

    29 english safety considerations related to laser products label with safety remarks on your device.

  • Page 8: English

    30 english 1. Components indroduction the teac dv-w50d is a modern high performance dvd±r/dvd±rw drive. It offers reading speeds of 12x for dvd-rom media and 32x for cd-rom media. The maximum writing speed is rated to 4x for dvd- rs/dvd+rs, to 2.4x for dvd+rws, to 2x for dvd-rws, to 16x for cd- rs a...

  • Page 9: English

    31 english 2. System requirements your teac drive supports all major operating systems (with the excep- tion of ms-dos, windows 3.1x and windows 95) and all major hard- ware platforms. To get the full performance it is recommended to use a system environment whichs computing power is equivalent to: ...

  • Page 10: English

    32 english 3. Precautions for installation and operation important safety instructions do not install any abnormal disk or dvd into the teac dv-w50d, which has a warp, a crack, and/ or a sticker on it. Do not install a shape-dvd/cd into the drive. In no event shall teac be liable for any damages cau...

  • Page 11: English

    33 english in poor recording. The following problems also can result occa- sionally: – the disk (dvd-r, dvd-rw, dvd+r, dvd+rw respectively cd- r, cd-rw) becomes defective because of faulty recording, and cannot be read. – additional recording cannot be made because of faulty previ- ous recording. (b...

  • Page 12: English

    34 english 4. Controls and functions 4. Controls and functions 4.1 front panel ➀ disk tray ➂ eject emergency hole ➃ eject button ➁ on/busy indicator (led) ➄ ventilation hole ➀ disk tray insert the disk (dvd, cd) with its label facing up. Note: please ensure the dvd/cd is inserted in a way where the ...

  • Page 13: English

    35 english 4 controls and functions operation mode indicator during reading/data transfer led lit during writing led lit audio play led lit seek lit when seek command is issued boot up (power on pc) led lit tray open/close led lit ➂ eject emergency hole when the power is switched off and the eject b...

  • Page 14: English

    36 english connector no. Audio signal 1 left channel signal 2 ground 3 ground 4 right channel signal ➂ power connector ➁ interface connector ➃ strap switch ➀ analog audio output connector ➄ ventilation outlet 4. Controls and functions 4.2 rear panel ➀ analog audio output connector for stereo audio s...

  • Page 15: English

    37 english 4. Controls and functions ➂ power connector connect to the +5 vdc and +12 vdc power source. Cable-side mating housing: 8981-4p molex cable-side mating terminal: 8980-3l molex current consumption teac dv-w50d power interface connector pin number pin no. Power 1 +12vdc 2 0v 3 0v 4 +5vdc 5v ...

  • Page 16: English

    38 english 4. Controls and functions ➃ ide configuration jumpers (strap swich) the drive has a master/slave/cable select jumper which must be correctly set before the drive is installed. The strap is factory-preset as shown: important: during setting the mode be sure to switch off respectively dis- ...

  • Page 17: English

    39 english 4. Controls and functions configure for each of the cables one of the drives as master and the other one as slave drive. Primary cable secondary cable notes master slave master slave ata hard disk drive – – – one hard disk drive on one cable. Dvd (master) – – – one drive on one cable. Dvd...

  • Page 18: English

    40 english 5. Connection to a personal computer 5. Connection to a personal computer 5.1 drive installation directions there are three possible positions for installation: horizontal installa- tion with the eject button to the right, and vertical installation in both possible directions. The install...

  • Page 19: English

    41 english 5. Connection to a personal computer (4) connect the power cable and the 40-pin data cable (assure the correct orientation, pin 1 is often marked with a color stripe) to the drive. Connecting in the wrong orientation may damage the drive and the pc! Power cable interface cable audio cable...

  • Page 20: English

    42 english 7. Installing drivers and the writer software 6. Connection to audio equipment it is possible to connect audio devices to the audio connector on the rear. 7. Installing drivers and the writer software as a general precaution the installation of the hardware has to be car- ried out as desc...

  • Page 21: English

    43 english 7. Technical support 7.3 compatibility or interoperability to other ide devices if there are any problems if other drives are connected to the same ide port (especially ide-changer, phase change drive, iomega, and oth- ers), the dv-w50d has to be connected as master or as a single drive. ...

  • Page 22: English

    44 english teac uk limited, dspd (u.K.) technical support freecall: 0800 08 53 704 (u.K. Only) mo-fr from 8:30 – 20:00 cet sa from 10:00 – 16:00 cet technical support fax: +49 (0) 611 7158 666 online rma: http://www.Teac.De/rma internet: http://www.Teac.De/support teac france s.A. (france) technical...

  • Page 23: English

    45 english 9. Specifications 1. Media applicable dvds dvd-rom (single and dual layer), dvd video, dvd audio dvd-r (vers. 2.00), dvd-rw (vers. 1.0+1.1), dvd+r (vers. 1.0+1.1), dvd+rw (vers. 1.2) dvd-ram is not supported applicable cds cd-rom mode-1/650 mb/700 mb, cd-da/74 min/79 min, cd-rom xa mode-2...

  • Page 24: English

    46 english 9. Specifications 4. Drive performance data transfer rate programm i/o: 16.6mb/s max. (default: pio mode-4) burst dma: 16.6mb/s max. (default: mw dma mode-2) burst udma: 33.3mb/s max. (default ultra dma mode-2) access time dvd: 140msec typical (random stroke) cd: 130msec typical (random s...