Teac FD-235 Series Installation Manual

Page of 4

Download

Bookmark us

TEAC FD-235 Series

3 1/2" 1.44 MB Floppy Disk Drive

Installation Guide

3 1/2'' diskette

insertion window

Activity indicator

Eject Button

Your FD-235 package includes:

* FD-235 3 1/2" floppy disk drive

* Installation Guide

Introduction

Thank you for purchasing the TEAC FD-235 Series 1.44 MB floppy disk

drive. This product is intended for use in IBM PC/AT compatible computers.

This quality drive will provide trouble-free operation for your computer

system if properly installed. PLEASE READ THE ENTIRE INSTALLATION

GUIDE THOROUGHLY BEFORE YOU BEGIN THE INSTALLATION.

Use a standard floppy controller card or the floppy connector (34 Pin) on

the motherboard.

Page 1
Teac fd-235 series 3 1/2" 1.44 mb floppy disk drive installation guide 3 1/2'' diskette insertion window activity indicator eject button your fd-235 package includes: * fd-235 3 1/2" floppy disk drive * installation guide introduction thank you for purchasing the teac fd-235 series 1.44 mb floppy di...
Page 2
2 preparing your personal computer for fd-235 floppy drive installation 1. Unplug your computer from the power source. 2. Remove cover from your computer. Refer to your computer system manual for this procedure. 3. If you are replacing a current floppy, note the cables that are connected to your flo...
Page 3
3 configuring for a: or b: drive use a standard ibm pc compatible cable with a twist at the end connector (figure b) to complete installation. Cable’s colored-line denotes line 1 to match to pin 1 on drive and motherboard’s connectors. A. To configure as your a: drive, connect the fd-235 series flop...
Page 4: Trouble Shooting
4 teac tech support: if you have questions on the floppy installation, please contact us: phone: 323-727-4860 fax: 323-869-8751 email: dspdtsg@teac.Com hours: m-f 8am-5pm pst website: www.Teac.Com/dspd/techsupport.Htm *ibm pc/at are registered trademarks of international business machines corp. Rev....