Teac HDB849 User Manual - page 8
Front and Rear Panel
1. Front panel
1 POWER BUTTON:
to turn on/off the main power supply.
2 USB:
3
4 REMOTE CONTROL SENSOR: Used to receive the signal from the Remote Control.
5
CHANNEL UP/DOWN: Used to change channels without using the Remote Control.
7 INDICATOR: Used to
power state of the Set Top Box,the LED will turn
red
standby mode. A blinking green LED indicate the
recording status .
Push
For software upgrade recording and media playback.
LED DISPLAY WINDOW: Displays the current channel number.
VOL+/-: Used to move around the menu screens or adjusting the volume.
6
indicate the
when the Set Top Box is in
8 STANDBY: Used to switch the set top box on and off.
2. Rear panel
1
2
3
4
5 COMPONENT VIDEO OUT:
6
7
8
RF IN:
feed
the Coaxial input
VIDEO: This socket outputs composite video signal.
AUDIO L/R: These sockets output Analog Audio L/R signal.
High definition audio and video output used to connect to a HDMI device.
This socket connects to your external Aerial.
RF LOOP THROUGH: This socket will
the RF signal to either your TV or
another video system.
COAXIAL: This socket connects to
on your surround sound system.
These sockets connect to your TV component input
terminals.
HDMI:
MAINS CABLE: This is used to connect to your main power supply.
1