Teac LCD2681FHD User Manual - Basic Operation

Basic Operation

Basic Operation

 11

The following section conveys the unit’s general operation, such as, switching the unit on, 

selecting the input source, and using the automated channel search command.

Switching the unit on

The following steps are a guide to switch the unit on:

1. Connect the television unit to the antenna wall socket using a coax television cable plug.

2. Connect power cord to power supply and turn on the POWER Switch to ON.

3. Press the POWER button on the remote control or on the television panel.

4. The on screen television display should appear.

Selecting an input source

The unit incorporates multiple input sources which can be

selected via the  INPUT button on the television panel or 

remote control. The following steps explain the procedures

involved.

1. Press the INPUT button to enter the Input menu. The

screen will display the Input Source menu.

2. Use the CH+/- button on the TV set or /\ / \/ direction

buttons to select the desired input source.

3. Press OK to enter the selected source.

NOTE: Please make sure the device is connected

before selecting the input source.

Input Source

Move

Select

Quit

OK

EXIT