User manual important ! Lpu192cd hi-fi turntable stereo system warranty information inside. Please read trademark of teac corporation japan www.Teac.Com.Au.
1.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualifed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects hav...
Control location 3 dust cover turntable tone arm dc input aux output (l) aux output (r) source button p-mode/mem button volume control power button record button +10 / folder+ button cd compartment lcd display m+ / button m- / button tun+/- controls aux input usb port open / close button rear side f...
This unit operates using the supplied ac adapter (operate at 240 v ~ 50hz) connecting ac adaptor note: only use the supplied adapter. 1. Plug the ac adaptor into normal a power outlet socket. 2. Insert the dc plug of the ac adaptor cord into the dc in jack at the back of the unit. Switching on for t...
Warning! This product uses a class 1 laser. Avoid any direct exposure to the laser beam. Use of controls, adjustments or procedures not listed in this guide may result in hazardous exposure. Handling compact discs to remove a cd from its storage case, press down on the center of case and lift the di...
Stop playback to stop playback, press the m- / button on the unit. The total number of tracks of the cds / mp3 disc / usb will be displayed. Skip track during playback, tune the tun+ / or tun- / controls to skip to the next or previous tracks. High-speed music search during playback, tuning and hold...
4. Repeat steps 2-3 to program up to 20 tracks. 5. Press the m+ / button to play the programmed tracks after programming is completed. The “prog” icon will be displayed during the programmed playback. 6. Tune the tun+ / or tun- / controls repeatedly until you reach the desired programmed tracks numb...
Gently open the dust cover. 1. Lift the dust cover all the way up until it stop, the cover will now stay open. 2. Remove white protective needle cover by gently pulling towards the front of the unit. 3. Release tone arm hold down clip by gently pushing to the right. This will unlock tone arm from it...
S usb recording from turntable etting up (aux in) connection aux-in jack will allow you to connect external music player or external sound source to the main unit. 1 1. Insert the usb stick into the usb port. 2. Press “source” button to phono mode. 3. Place the record on the turntable and move the t...
Power output. . . . . . . . . . . . . . . . . . Speakers . . . . . . . . . . . . . . . . . . . . . . 0.8 watt rms x 2 channels (turntable section) 1.5 watt rms x 2 channels (cd, usb, radio, aux-in section) 4 ohms 5w x 2 cd disc- disc diameter . . . . . . . . . . 120mm / 80mm record speed. . . . . . ...
In the event of a product failure within the warranty period, please call the teac warranty service hotline 1300 553 315 between monday to friday - 8.30am to 5pm aest *please have your purchase receipt and the product’s serial number ready for other enquiries and support please visit www.Teac.Com.Au.
