Teac MCD65BT User Manual - page 12
O
ACTION
N UNIT
ON REMOTE
OPEN/CLOSE
OPEN/CLOSE
- -
- -
- -
- -
SOURCE
/
/
/
Listening to CDs
This unit can play Audio CDs and MP3/WMA CDs.
Navigating within a music track
Hold during playback and release at the point you want to listen to.
Skip to the previous/next track
Press to skip.
Creating a playlist
You can set up to 20 tracks to be played in sequence.
1. Insert a CD and wait for it to be read. Ensure playback is stopped.
2. Press
PROG on the remote control.
3. Press or input the track number directly with the 0~9 buttons to select a track.
4. Press
PROG to add the selected track to the playlist. Repeat steps 3-4 to add more.
5. Press to play the programmed playlist.
NOTE: With MP3 discs, press PROG, then select “1” to create the playlist. Then follow
steps 2-5 to set up the playlist.
Repeat/Shuffle
1. Press
REPEAT or RANDOM on the remote control to cycle through available options.
2. To turn off repeat/random playback, press
REPEAT/RANDOM to find the OFF option.
MP3/WMA support is as follows:
- Sampling frequency: 32-48 (MP3/WMA)
- Bitrate: 32-320kbps (MP3), 40-320kbps (WMA)
- Filenames should not contain special characters such as /:*? etc
- Up to 999 files on the disc. If the disc contains more than 999 files, only the first 999
tracks will be listed.
1. Open the disc tray
2. Insert the CD (label facing up)
3. Close the disc tray
4. Select CD Mode (if not in CD Mode)
5. Start CD playback (Audio CDs will
normally start playing automatically)
6. Stopping CD playback
Basic CD Playback
MP3/WMA Discs
8