Teac MP-8000 User Manual - Recording Quality Settings
GB – 16 | MP-8000
2. Press and hold the A-B button to switch to recording mode.
3. Press the MENU button to open the record menu dialogue.
4. With the AudioSource selection highlighted, press the
but-
ton to change the AudioSource to Line-in.
5. Press the
button to return to recording mode.
6. Start the external device. Press the A-B button to start record-
ing.
Recording Quality Settings
The recording mode menu also allows you to change the de-
fault recording quality.
1. Press and hold the A-B button to switch to recording mode.
2. Press the MENU button to display the recording mode menu.
3. From the recording mode menu, you have the following op-
tions:
AudioSource: Adjust the audio source for
recording. Having discussed in the previous
section.
Sample Rate: Adjust the sample frequency.
Select from the following: 8/11.025/12/16/
22.05/24/32/44.1/48kHz
BitRate: Adjust the bit rate. Select from the
following: 32/40/48/56/64/80/96/112/128/
160kbps.
Use the
and buttons to adjust the various settings. Press
the
button to exit the menu and return to recording mode.