Teac TE-900 Installation manual - page 9
7
8
Installation Connection Manual
ASM ON/OFF (Auto Store)
LOCAL/DISTANCE SELECT
Press MENU button to access the System Menu. User can be select below function:
User has 5 seconds to use the Encoder Volume knob to turn on the ASM ON/OFF mode. The six
strongest stations of the selected band are saved in preset channel automatically.
This feature is used to designate the strength of the signals at which the radio will stop during
automatic tuning. "Distance" is the default, allowing the radio to stop at a broader range of signals. To
set the unit to select only strong local stations during automatic tuning, rotate the volume control until
“Local”appears in the display.
TUNER AREA
User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the
area this unit is used in, EUROPE, USA, ASIA, or LATIN.
BEEP TONE (BEEP)
TIME SET (CLK)
The time on the clock will be set to 12:00 as the default. Program the current time by rotating the
volume control clockwise to adjust the minutes and counterclockwise to adjust the hours.
The beep tone feature allows the selection of an audible beep tone to be heard each time a button is
pressed on the face of the radio. "BEEP TONE On" is the default display. Rotate the volume control to
select the “BEEP TONE OFF” option.
Adjust system menu settings
■
■
■
■
■
14
12
13
No.
Item
Decriptions
Press this button to eject the Disc.
Insert the disc into CD slot.The CD will begin to play.
User can reset the unit to its default setting. Press this button by using a
ball-point penor a similar tool.
CD EJECT
DISC SLOT
RESET
12
13
14
Press AUDIO button to access the Audio Menu. The below Audio Setting can be select:
VOL (Volume Level)
SUBW ON/OFF (Subwoofer)
BAS (Bass Level)
TRB (Treble Level)
BAL (Balance)
FAD (Fader)
User has 5 seconds to use the Encoder Volume knob to adjust the desire volume level, the volume level
will be shown on the LCD display ranging from 00 (lowest) to 50 (highest).
Turn the Encoder Volume knob to select Subwoofer function On/Off.
User has 5 seconds to use the Encoder Volume knob to adjust the desired Bass level range from -10 to
+10.
User has 5 seconds to use the Encoder Volume knob to adjust the desired Treble level range from -10 to
+10.
User has 5 seconds to use the Encoder Volume knob to adjust the Balance between the right and left
speakers from 10R (full right) to 10L (full left).
User has 5 seconds to use the Encoder Volume knob to adjust the Fader between the front and rear
speakers from 10R (full rear) to 10F (full front).
The major function on the back view
Adjust audio settings
■
■
■
■
■
■