Therma-Stor HI-E DRY 195 Installation, Operation And Maintenance Instructions

Installation, Operation and Maintenance Instructions

– Read and Save These Instructions –

This manual is provided to acquaint you with 

the dehumidifier so that installation, operation 

and maintenance can proceed successfully. 

Ultimate satisfaction depends on the quality 

of installation and a thorough understanding 

of this equipment. The dehumidifier is built 

around tested engineering principles and has 

passed a thorough inspection for quality of 

workmanship and function.

HI-E Dry 195

Installation, Operation and Maintenance Instructions

4201 Lien Rd 

Phone 608-237-8400

Madison, WI 53704 

Toll-Free 1-800-533-7533

www.QuestProtect.com sales@QuestProtect.com 

– Read and Save These Instructions –

Specifications subject to change without notice.

TS- 622

04/14

1

HI-E DRY 195

HI-E Dry 195:

•  Controlled by a dehumidistat with settings

from 20 to 80 percent relative humidity

and a positive “on” and “off” setting.

•  Contains a blower switch that permits

continuous blower operation independent

of dehumidification.

•  Portable and provided with four casters.

•  Contains an internal condensate pump

capable of lifting condensate 17 feet and

20 feet of condensate hose.

•  Wiring is through a factory installed six

foot power cord; 115 volt with ground.

•  Environmentally friendly R410A refrigerant.

Water Removal Rates (Pints/Day) 

320 pints  

90˚F, 90% 

245 pints  

80˚F, 80% 

192 pints  

80˚F, 60% (AHAM)

205 pints  

70˚F, 80% 

150 pints  

70˚F, 60% 

162 pints  

60˚F, 80% 

91 pints   

60˚F, 60% 

81 pints   

50˚F, 80% 

40 pints   

50˚F, 60% 

quest

quest