Therma-Stor Phoenix CAM Pro Owner's Manual
Owner’s Manual — Phoenix CAM Pro
Installation, Operation & Service Instructions
1
www.UsePhoenix.com • sales@UsePhoenix.com
Toll-Free 1-800-533-7533
Read and Save These Instructions
Low amp draw, balanced airflow characteristics and maximum velocity of 2700 FPM are what propel the
Phoenix to rise above the competition.
The unique 1/3 horsepower design of the Phoenix Centrifugal Air Mover Pro, coupled with a two-speed
switch, allows the restoration technician to deliver the most airflow using the fewest amps.
Maximum amp draw on high speed is 2.8 amps. This drops to a mere 2.4 amps on low speed. It is now
possible to fit as many as four Phoenix Centrifugal Air Mover Pros onto a typical 15 amp household circuit.
The Phoenix CAM is lightweight and has an on-board duplex GFCI outlet, circuit breaker, and superior cord
management.
The Phoenix housing is durable, washable, and chemical resistant. It features multiple operating positions
allowing it to be angled up from horizontal to 45° and 90°.
The Phoenix Centrifugal Air Mover Pro
• 2-Speed 1/3 Horsepower Motor
2.8 Amps on High Speed
2.4 Amps on Low Speed
• Maximum Velocities 2700 FPM
• Balanced Exhaust Airflow
• Directional Airflow
Horizontal, 45° Angle, 90° Angle
• Durable, rugged, chemical resistant housing, fan
wheel, and controls design.
• Operator interface conveniently located for easy
access, featuring: power indicator lamp and large
three-position switch.
• Phoenix exclusive Pilot Light and Sealed Switch are
recessed to prevent damage.
• Ergonomic carry handle and power cord storage.
• Non-marking, anti-skid, rubber feet.
Specifications subject to change without notice.
TS-480c 08/11
Phoenix Centrifugal Air Mover Pro
PN 4027550
4201 Lien Rd. • Madison, WI 53704