TRIPLE ONDA EXP 210/2 User Manual - page 2
EXP 210/2
2009
2
TRIPLE ONDA,
30 years designing, manufacturing and dealing
TRIPLE ONDA LAUNCHES A NEW PRODUCT
RANGE: EXP SERIES
Triple Onda launches a new product range,
called EXP Series, designed to cover little and
medium events.
New EXP Series cabinets are build-in amplified
and processed for professional performance. As
usual, all Triple Onda’s products follows the
same philosophy: high quality design, robust and
unusual products for all the professionals who
live on the live sound every day.
.
1. INTRODUCTION
1.1. General
TRIPLE ONDA S.L. would like to thank you for
your confidence in our EXP Series cabinets.
The EXP Series is the new product of TRIPLE
ONDA S.L., and it’s a new family of extra flat
sound projection systems. It contributes with
advantages and solutions where the weight limit
and not much space available coexist.
Main advantages:
The first extra flat sound system that
offers an exact vertical angle calibration
between units
Lower weight and size drivers in order
to obtain extra flat units
The top range models are equipped
with ribbon drivers in order to obtain a
higher definition at high frequencies
It’s needed only a pair of reduced
dimensions flight cases to transport a
big sound system due to it’s small
dimensions
We suggest you to carefully read the following
instructions in order to obtain the best results in
performance.
1.2.
Safety Instructions
1. All the safety and operation instructions
should be read before this product is operated.
2. This product should not be exposed to rain or
moisture. Do not use it, for example, near a
swimming pool, water fountain or any liquid
sources.
3. Clean only with a dry cloth.
4. Do not install near heat sources such as
radiators or other devices which produce heat.
5. This equipment should be serviced only by
qualified service personnel when:
Objects have fallen, or liquid has spilled;
or
This product does not appear to operate
normally; or
This product has been exposed to rain; or
The chassis is damaged.
2. EXP 210/2 OPERATING
INSTRUCTIONS
2.1. Connections
1-INPUT: NL-4 connectors (speakon)
1 + = LF 1 - = LF 2 + = HF 2 - = HF
2-LINK: NL-4 connector used for paralleling
only two units (non-autoamplified models),
which will share the same input.