- DL manuals
- Triplett
- Monitor
- CamView Elite
- Instruction Manual
Triplett CamView Elite Instruction Manual
Summary of CamView Elite
Page 1
Camview ™ elite ruggedized wrist mounted test monitor instruction manual 7/15 99 washington street melrose, ma 02176 phone 781-665-1400 toll free 1-800-517-8431 visit us at www.Testequipmentdepot.Com.
Page 2
• thank you for purchasing the triplett camview ™ elite cctv monitor. Please read the complete manual carefully before using the product. • to assure safe use of this product, please read the section on safety carefully, and observe any cautions or warnings posted there and throughout this manual. •...
Page 3: Table Of Contents
Table of contents safety information .............................................................................. 1 introduction ........................................................................................ 3 features ........................................................................
Page 4: -1-
1: safety information dear customer: for the greatest safety and reliable operation, please follow these guidelines for use and care of the product. Please retain these instructions for future reference. 1. Do not expose the product to excessive dust or dirt, intense vibration, extreme humidity, or ...
Page 5
11. If battery leaks, avoid any contact with your eyes, skin, or clothing. If contact occurs, flush immediately with water. If necessary contact a doctor for additional instructions. 12. Clean the monitor with a damp cloth and mild detergent. Do not use solvents as they may damage the product's case...
Page 6: 2: Introduction
2: introduction the triplett camview ™ elite is a portable battery operated video monitor designed to aid cctv/ security electronics installers and maintenance technicians. Its high contrast 3.5" lcd screen provides a large image that is especially useful for adjusting camera setup, focus, and posit...
Page 7: 3: Features
3: features • 3.5" high contrast active matrix tft lcd display with non-reflective screen protector • high brightness daylight viewable display • wrist mountable • 6 hour rechargeable battery • bnc video input jack • bnc video output jack (loop-thru) • 12vdc (1a) output to power video camera • on sc...
Page 8
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4.
Page 9: -6-
6: battery information to obtain the maximum battery life and avoid battery leaks, fire or explosion, observe the following instructions and warnings. • please charge the battery before first use of product if the product is unused for several weeks, the battery will slowly discharge by itself. Rech...
Page 10: -1-
Installing and charging the battery: the battery should already be installed in the device. Follow the figures below on how to connect the battery connector to the battery terminal connector inside the product. -1- slide battery cover to the left (see arrow on cover) to remove the battery cover you ...
Page 11: Cannot
• now that the battery is connected properly. Plug the charger into a power source (wall outlet) then plug the charger cable into the "dc 5v in" (3) jack. The led indicator will illuminate red indicating the camview ™ is charging. • when the red led turns green the battery is fully charged. Usually,...
Page 12: Turning The Product On:
7: general instructions turning the product on: after charging the battery (see section 6), slide switch on the bottom of the unit (11) to the right. The led should light up green and a splash screen with the triplett logo should appear. After the splash screen a display on the upper right will appe...
Page 13: Using 12Vdc Camera Power:
Using 12vdc camera power: 12vdc at 1 amp is provided via 5.5mm coaxial connector on the top of the camview ™ labeled "dc 12v out" (3). This power source will operate many standard box or dome cameras. Some cameras, espe cially ptz models, may require more power than the camview ™ can provide. Some ...
Page 14: -11-
On screen display (osd) / video settings: the camview ™ elite is equipped with a osd in order to help change various video settings. The osd can be activated and deactivated when the "esc/menu" (6) button is pressed. Once pressed the osd will display on the screen. The factory settings are defaulted...
Page 15
1 2.
Page 16: Using The Zoom Function:
Using the color bar generator: the camview ™ elite is equipped with a color bar generator in order to test outgoing cables and monitors. The color bar generator can be activated when the "p/g" (8) button is pressed. Once pressed the screen will display a 8 segmented colored bar graph. The color bar ...
Page 17: Standby And Low Battery:
Using the outdoor setting: the camview ™ elite is equipped with a short cut button to activate the highest level of brightness the camview ™ can display. The outdoor setting can be activated and deactivated when the "outdoor" (10) button is pressed. Once pressed the screen will instantly change from...
Page 18: 8: Specifications
8: specifications display 3.5" high contrast active matrix tft lcd screen video formats supported ntsc and pal resolution 320 x 240 aspect ratio 4:3 viewing angle 40/60/60/60 (up/down/left/right) brightness 250cd/m 2 contrast 350:1 response time 25ms video level and impedance 1.0vp-p ?Sohm video adj...
Page 19: Battery
Battery ac charger 12vdc camera power battery recharge time working temperature storage temperature relative humidity product dimensions weight lithium polymer input: 110-240v - 50/60hz -0.4a output: dc 5 v/2a 1 amp max. Short circuit protected approximately 1.5 hours 32 to 120 degrees f o to 120 de...
Page 20: Problem
Problem reason solution won’t turn on battery discharged charge battery video signal removed reapply video signal battery is cold warm monitor before using monitor turns off battery discharged charge battery short battery life temperature is too low charge battery at indoor temperature won’t charge ...