Tripp Lite APSINT612 Owner's Manual

Manual is about: DC-to-AC Inverter/Charger

Summary of APSINT612

  • Page 1

    Owner’s manual reliable emergency backup power congratulations! You’ve purchased the most advanced, feature-rich inverter/charger designed as an alternative energy source during utility power failures. Tripp lite aps inverter/chargers keep your equipment constantly up and productive through all util...

  • Page 2: Specifications

    2a specifications note on labeling two symbols are used on the aps labels. V~ : ac voltage : dc voltage limited warranty tripp lite warrants its inverter/chargers to be free from defects in materials and workmanship for a period of one year (except for outside of u.S.A., canada and mexico—120 days) ...

  • Page 3

    3a important safety instructions save these instructions! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all tripp lite inverter/chargers. Location warnings • install your inverter/charger (whether for a mobile or st...

  • Page 4: Feature Identification

    4a feature identification identify the premium features on your specific model and quickly locate instructions on how to maximize their use. Configuration dip switches: optimize inverter/charger operation depending on your application. See page 6 for setting instructions. Operating mode switch: cont...

  • Page 5: Operation

    5a operation switch modes after configuring, mounting and connecting your inverter/charger, you are able to operate it by switching between the following operating modes as appropriate to your situation: auto/remote: switch to this mode when you need constant, uninterrupted ac power for connected ap...

  • Page 6: Configuration

    6a configuration select battery type—required caution: the battery type dip switch setting must match the type of batteries you connect, or your batteries may be degraded or damaged over an extended period of time. See “battery selection,” p. 7 for more information. Battery type switch position gel ...

  • Page 7: Battery Selection

    7a battery selection 540 watts ÷ 12v = 45 dc amps 45 dc amps × 5 hrs. Runtime × 1.2 inefficiency rating = 270 amp-hours 270 amp-hours ÷ 20 amps inverter/charger rating = 13.5 hours recharge select battery type select “deep cycle” batteries to enjoy optimum performance from your inverter/charger. Bat...

  • Page 8: Mounting

    8a mounting warning! Mount your inverter/charger before dc battery and ac power connection. Failure to follow these instructions may lead to personal injury and/or damage to the inverter/charger and connected systems. Tripp lite manufactures a variety of different inverter/chargers with a variety of...

  • Page 9: Battery Connection

    9a non-vehicular or vehicular non-vehicular applications include stationary configurations as well as mobile configurations that are not integrated into a vehicle’s electrical system. In a parallel connection, your inverter/charger’s nominal dc input voltage (listed in the specifications section mus...

  • Page 10: Ac Input/output Connection

    10a ac input/output connection to avoid overloading your inverter/charger, be sure to match the power requirements of the equipment you plan to run at any one time (add their total watts) with the output wattage capacity of your inverter/charger model (see specifications). When figuring the power re...

  • Page 11: Troubleshooting

    11a try these remedies for common inverter/charger problems before calling for assistance. Call tripp lite customer service at (773) 869-1212 before returning your unit for service. Troubleshooting symptom problems corrections unit is not properly connected to utility power. Connect unit to utility ...

  • Page 12

    200302117 93-2113 1111 w. 35th street, chicago, il 60609 usa customer support: (773) 869-1212 www.Tripplite.Com.