1 owner’s manual 1111 w. 35th street, chicago, il 60609 usa www.Tripplite.Com/support copyright © 2011 tripp lite. All rights reserved. Hdmi over cat5 extenders and extender/splitters extender kit model: b126-1a1 and b126-1a1-wp local unit models: b126-002 and b126-004 remote unit models: b126-1p0, ...
2 package contents product features b126-1a1 b126-1a1- wp b126-002 b126-004 b126-1a0 b126-1a0- wp -1 b126-1p0 b126-1p0- wp -1 b126-110 local unit (l), remote unit (r), or both (b) b b l l r r r r r external power supplies (0, 1, or 2) 2 2 1 1 1 1 0 0 1 mounting hardware x x x x x wallplate screws x ...
3 product features b126-1a1 • hdmi over cat5 active extender kit (box-style) • extends a 1080i (60hz) signal up to 200 ft. From the source, or a 1080p (60hz) signal up to 150 ft. From the source • features an additional hdmi port on the local transmitter unit for the connection of local monitor • re...
4 product features b126-004 • 4-port hdmi over cat5 extender/splitter local transmitter unit (box-style) • splits an hdmi signal into 4 • features an additional hdmi port, which can be used to connect a local monitor or to daisy-chain additional b126-004 units. Up to 3 b126-004 units can be daisy-ch...
5 product features b126-1a0-wp-1 • hdmi over cat5 active extender wallplate • works with b126-002 and b126-004 extender/splitters to extend a 1080i (60hz) signal up to 200 ft. From the source, or a 1080p (60hz) signal up to 150 ft. From the source • features a built-in equalization control for video...
6 product features b126-110 • hdmi over cat5 active extender remote/repeater unit (box-style) • extends and expands tripp lite hdmi over cat5 installation, allowing multiple monitors to be located at different points in a chain of up to 700 ft. • extends a 1080i (60hz) signal up to 175 ft., or a 108...
7 mounting instructions (select models only) the b126-002, b126-004, b126-1a1, b126-1a0 and b126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting met...
Optional local monitor local transmitter remote receiver up to 200 ft. At 1080i (60hz) up to 150 ft. At 1080p (60hz) blu-ray 8 standard extender kit installation notes: 1) test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) to achieve maximum dis...
9 standard extender kit installation 1 make sure the hdmi source is powered off. 2 connect the hdmi source to the input port on the b126-1a1 or b126-1a1-wp local unit using a tripp lite p568-series hdmi cable. 3 optional for b126-1a1: connect a local monitor to the local port on the b126-1a1 local u...
Optional local monitor b126-1a1 local transmitter b126-1a1 remote receiver b126-110 remote repeater b126-110 remote repeater b126-110 remote repeater up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) blu-ray up to 175 ft. At 1080i...
11 extender kit with remote/repeater installation 3 optional for b126-1a1: connect a local monitor to the local hdmi port using a tripp lite p568-series hdmi cable. 4 connect the external power supply to the local unit and plug it into a tripp lite surge suppressor, pdu or ups. The green led illumin...
12 extender kit with remote/repeater installation 11 to add a third remote/repeater unit, repeat steps 8 through 10. To finish your installation with the b126-1a1 or b126-1a1-wp remote receiver unit, proceed to step 12. 12 using cat5e/6 cable, connect the rj45 output port on the last remote/repeater...
B126-004 optional local monitor blu-ray b126-1p0-wp-1 b126-1a0-wp-1 b126-1p0 b126-1a0 up to 100 ft. At 1080i (60hz) up to 50 ft. At 1080p (60hz) up to 200 ft. At 1080i (60hz) up to 150 ft. At 1080p (60hz) 13 standard extender/splitter installation notes: 1) test to make sure the entire installation ...
14 standard extender/splitter installation 1 make sure the hdmi source is powered off. 2 connect the hdmi source to the input port on the b126-002 or b126-004 using a tripp lite p568-series hdmi cable. 3 optional for b126-004: connect an hdmi monitor to the local port on the b126-004 using a tripp l...
15 standard extender/splitter installation 10 repeat step 9 for each additional monitor you are connecting. 11 turn on the power to the hdmi source. The orange rj45 leds illuminate on the b126-002 and b126-004 to indicate the unit is receiving a signal from the source. The screen should now be displ...
Optional local monitor b126-004 local transmitter b126-110 remote/ repeater b126-110 remote/ repeater b126-110 remote/ repeater up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) blu-ray b126-110 remote/ repeater b126-110 remote/ r...
17 extender/splitter with remote/repeater installation 1 make sure the hdmi source is powered off. 2 connect the hdmi source to the input port on the b126-002 or b126-004 using a tripp lite p568-series hdmi cable. 3 optional for b126-004: connect a local monitor to the local hdmi port using a tripp ...
18 extender/splitter with remote/repeater installation 10 connect the external power supply to the remote/repeater unit and plug it into a tripp lite surge suppressor, pdu or ups. The green power led and the green rj45 leds illuminate to indicate the unit is receiving power. 11 to add a third remote...
19 extender/splitter daisy-chain installation (b126-004 only) notes: 1) test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) to achieve maximum distance and performance, use 24 awg solid wire cat5e/6 cable. Using stranded wire cat5e/6 cable, or ca...
Level 1 level 2 level 3 optional local monitor blu-ray 20 extender/splitter daisy-chain installation (b126-004 only) 201109206-93-3023-en.Indd 20 10/24/2011 10:01:23 am.
21 extender/splitter daisy-chain installation (b126-004 only) 1 make sure the hdmi source is powered off. 2 connect the hdmi source to the input port on the b126-004 using a tripp lite p568-series hdmi cable. 3 connect the local port on the b126-004 to the input port on a second b126-004 using the i...
22 12 connect the b126-1p0 hdmi connector to a monitor; or, connect the b126-1p0-wp-1, b126-1a0 or b126-1a0-wp-1 to a monitor using a tripp lite p568-series hdmi cable. Both the green and orange rj45 leds on the b126-1p0, and the green led on the b126-1p0-wp-1, illuminate to indicate the unit is rec...
23 extender/splitter daisy-chain with remote/repeater installation (b126-004 only) notes: 1) test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) to achieve maximum distance and performance, use 24 awg solid wire cat5e/6 cable. Using stranded wire...
Optional local monitor b126-004 local transmitter b126-110 remote/ repeater b126-110 remote/ repeater b126-110 remote/ repeater up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) up to 175 ft. At 1080i (60hz) up to 125 ft. At 1080p (60hz) blu-ray b126-110 remote/ repeater b126-110 remote/ r...
25 1 make sure the hdmi source is powered off. 2 connect the hdmi source to the input port on the b126-004 using a tripp lite p568-series hdmi cable. 3 connect the local port on the b126-004 to the input port on a second b126-004 using the included 1-ft. Hdmi daisy-chain cable. 4 repeat step 3 if yo...
26 extender/splitter daisy-chain with remote/repeater installation (b126-004 only) 11 using cat5e/6 cable, connect the rj45 output port on the first remote/repeater unit to the rj45 input port on a second remote/ repeater unit. 12 connect a monitor to the hdmi output port on the remote/repeater unit...
27 extender/splitter daisy-chain with remote/repeater installation (b126-004 only) 20 if necessary, use the equalization control on the remote/repeater unit(s) and remote receiver unit to adjust the video image. Note: an improper equalization setting can cause the monitor not to display a picture at...
28 1111 w. 35th street, chicago, il 60609 usa www.Tripplite.Com/support 201109206 • 933023 weee compliance information for tripp lite customers and recyclers (european union) under the waste electrical and electronic equipment (weee) directive and implementing regulations, when customers buy new ele...
