1 owner’s manual dvi over cat5 dual display extender / splitter model: b140-002-dd 1111 w. 35th street, chicago, il. 60629 • www.Tripplite.Com/support copyright © 2013 tripp lite. All rights reserved. Package contents 2 product features 2 mounting 3 standard installation 4 remote repeater installati...
2 package contents product features • b140-002-dd extender / splitter transmitter unit • external power supply (input: 100-240v, 50/60hz, 0.5a output: 5v, 2a) • mounting hardware • owner’s manual • transmits a dvi-d single-link signal from a set of dual dvi inputs to two sets of dual displays • a b1...
3 product features optional accessories: • b140-1a0 dvi over cat5 extender – active remote receiver unit • b140-1a0-wp dvi over cat5 extender – active remote receiver wallplate • b140-1p0 dvi over cat5 extender – passive remote receiver unit • b140-1p0-wp dvi over cat5 extender – passive remote rece...
4 standard installation note: 1. Test to make sure that the entire installation works properly before pulling cables through ceilings/walls. 2. 24awg, solid wire cat5e/6 cable, such as tripp lite’s n202-series, is required to achieve maximum distance and resolution. 3. The signal from input port a i...
5 standard installation 5 using cat5e/6 cable, connect rj45 port 1a to a b140-series remote receiver unit. 6 repeat step 5 to connect each rj45 port to a b140-series remote receiver unit. 7 b140-1a0 and b140-1a0-wp only: connect the external power supply to the active receiver unit, and plug it into...
6 remote repeater installation note: 1. Test to make sure that the entire installation works properly before pulling cables through ceilings/walls. 2. 24awg, solid wire cat5e/6 cable, such as tripp lite’s n202-series, is required to achieve maximum distance and resolution. 3. The signal from input p...
7 remote repeater installation 7 connect the external power supply to the repeater and plug it into a tripp lite surge suppressor, pdu, or ups. The green power led and the green rj45 leds illuminate to indicate the unit is receiving power. Add up to 3 repeaters per channel, for a total of 4 displays...
8 remote repeater installation 14 turn on the power to the dvi source. The orange rj45 led’s on the b140-002-dd, b140-110, and b140-1a0, and the orange activity led on the b140-1a0-wp, will illuminate. The video image should now be displayed on the connected monitors. 15 if necessary, use the equali...
9 troubleshooting 4 what resolution are you trying to reach? Tripp lite’s dvi over cat5 extenders are tested to support up to 1920 x 1080 @ 60hz video resolution (see the product features section or the installation diagrams in this manual for details on max distance and resolution when using the re...
10 troubleshooting 8 check your cabling for any damages that may have occurred during installation. If a cable connector is loosened from pulling through ceilings/ walls, or the cable jacket is damaged causing the wiring to be exposed, you will not be able to achieve maximum performance. 9 are the t...
11 warranty & warranty registration 1-year limited warranty tripp lite warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. Tripp lite’s obligation under this warranty is limited to repairing or replacing (at its s...
12 1111 w. 35th street, chicago, il. 60629 • www.Tripplite.Com/support 13-01-085 • 93-3287_reva warranty & warranty registration weee compliance information for tripp lite customers and recyclers (european union) under the waste electrical and electronic equipment (weee) directive and implementing r...