Tripp Lite B140-004 Specifications

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: 

saleshelp@tripplite.com

Model #: B140-004

DVI over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit

Highlights

Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz

For longer distances - Use a 

B140-1A0

 or 

B140-1A0-WP

 active receiver unit

to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz

signal up to 200 ft.

For shorter distances - Use a 

B140-1P0

 or 

B140-1P0-WP

 passive receiver

unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @

60Hz signal up to 100 ft.

Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's 

N202-Series

, to

achieve maximum distance and resolution

Can further expand the range and number of monitors by adding 

B140-110

repeaters

Compatible with all operating systems

Plug and play, no software or drivers required

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule

purchases

Description

 The B140-004 transmits a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum

distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's 

N202-Series

). An additional DVI port is provided for the connection of a

local monitor. This local DVI port can also be used to daisychain up to 3 units together, allowing for the connection of up to 13 monitors (12 remote,

1 local). Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted. In addition, up to three units can be

mounted in 1U of rack space using a Tripp Lite 

B132-004-RB

 19" rackmount bracket. The B140-002 is compatible with all operating systems, and is

plug and play, with no software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect the B140-004 transmitter to a DVI source using a Tripp Lite 

P561-Series

 DVI cable (not included). Connect a Tripp

Lite B140-series receiver (not included) to each display using a Tripp Lite 

P561-Series

 DVI cable (not included). Finally, each remote receiver is

connected to an RJ45 port on the B140-004 using a single Cat5e/6 cable.

For longer extension distances, use a 

B140-1A0

 or 

B140-1A0-WP

 active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a

1024 x 768 @ 60Hz signal up to 200 ft..

For shorter extension distances, use a 

B140-1P0 

or 

B140-1P0-WP

 passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a

1024 x 768 @ 60Hz signal up to 100 ft..

Further expand the range and number of monitors by using a 

B140-110

 repeater unit. Add up to four remote units (three repeaters and one active

receiver) to each channel of the B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x

1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be

extended up to 175 ft.. 

Package Includes

B140-004 DVI Over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit

1 ft. DVI daisychain cable

Mounting hardware

External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)

Owner's Manual

Features

Transmit a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable