Tripp Lite PowerVerter APSINT3636VR Specification Sheet

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: 

saleshelp@tripplite.com

Model #: APSINT3636VR

PowerVerter® APS INT Series 3600W Inverter/Charger with Auto-Transfer Switching and Line Interactive

Voltage Regulation

Highlights

36V DC or 230V AC input; 230V, 50 Hz output (hardwired)

3600 watts continuous, 5400 watts OverPower and 7200 watts DoubleBoost

inverter output (see specifications)

3 stage, 30 amp selectable wet/dry cell battery charger

Auto Transfer Switching option for battery backup / UPS operation - includes

wired APSRM4 remote control switch

Automatic Voltage Regulation corrects brownouts and overvoltages without

using battery power

Description

Tripp Lite's APSINT3636VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run

UPS, a standalone power source or an automotive inverter. Supplies up to 3600 watts of continuous 230V AC power from any 36V battery or

automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is

recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near

instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies

batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line

power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects

line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer

design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on

startup. Included APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status

information (APSRM4 included). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to

a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer

voltages.

Applications

Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion

vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an

uninterruptible power supply (UPS) for items compatible with a 20 millisecond transfer time. NOTE: For sump pump applications, Tripp Lite

recommends its "UT" Utility Truck Inverter/Chargers.

Package Includes

APSINT3636VR Inverter/Charger

Instruction manual with warranty information

Wired Remote Switch with full LED status indicators (model APSRM4)

Features

Supports 230V AC output from a 230V AC line power source or 12V DC battery source