Tripp Lite SR42UWEXP Quick manual

42U White SmartRack Premium Enclosure (no side

panels included)

MODEL NUMBER: SR42UWEXP

Description

The SR42UWEXP is an expansion model used when several cabinets are bayed together. It has doors and a

roof but no side panels. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data

center application. The SR42UWEXP is also compatible with hot aisle/cold aisle configurations.

The SR42UWEXP houses 3000lbs of standard 19-inch rack equipment in 42U. Offers vendor-neutral square

hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19" equipment. Its front and

rear pairs of vertical rails are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and

an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.

Each rack space within the enclosure is numbered for ready reference. Two of these adjustable vertical mounting rails support toolless button-mount 0U

installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.

The top panel of the SR42UWEXP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for

cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UWEXP is open-bottom.

All components of the SR42UWEXP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility

earth ground. The removable front and rear doors feature quick-release ground wires.

To simplify deployment, the SR42UWEXP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be

secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure

over long distances. 

Features

Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)

Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures

consistent rail placement without requiring time-consuming measurements.

Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting

Highlights

42U White SmartRack enclosure

with doors and NO side panels.

'EXP' version is an expansion

model for when several cabinets

are bayed together

4 interior vertical posts with

unthreaded square hole openings

Standard 24" (600mm) width and

42" (1050mm) depth for

optimizing floor space

Ships fully assembled

Massive front to rear ventilation

capacity

3000 lb stationary / 2250 lb rolling

load capacity

Locking, removable, reversible

front and rear doors

Rolls through standard 7 foot

doorway

Package Includes

SR42UWEXP

Keys

Mounting Hardware

Owners Manual

1 / 4