µ-Dimension Glow DSP8 Instruction Manual - Before You Begin
To Ensure proper operation of your new purchase, please follow the
instructions and suggestions located throughout this manual.
Before You Begin
Please check the suitability of the installation before you begin. Do
not cut an portion of the cars structure. Pay close attention to what is
behind the vehicles panels or carpeted area you are considering to
mount your newly purchased product. Often vehicle manufacture will
hide wires, computers or other electronic devices in the exact areas
your wish to install in.
Installation, tuning and calibrations of the DSP8 is not recommended
for novice or inexperienced installers. If you do not have experience
with automotive electrical and mechanical systems please contact a
professional installer. Paying a qualified installer is almost always
cheaper than paying a dealership to repair your car.
Picking a Location For Your Amplifier
Your DSP8 must be securely mounted to a solid surface. Please
select a location in the trunk or passenger compartment of your
vehicle that will continuously be dry and free of moisture and allow
for adequate airflow to provide cooling to your amplifier. Do not
mount the amplifier to any area that may be effected by excessive
vibration (like a subwoofer enclosure).
Supplying enough Power
Your amplifier does NOT make power. Amplifiers convert existing
power, or current from your vehicles electrical system and turn into
musical energy. Simply stating, It takes power to make power. If the
amplifier cannot receive the power it needs it will no produce its full
factory specified output.