U-Drive Lite MT4037 User Manual - Playback
7
EN
Menu item
Function
Format
All data will be deleted including pro-
tected fi les.
Auto Off
To save power, the car camcorder is turned
off automatically after a period of time.
There are two options: [On] / [Off ].
Reset All
To reset the entire menu and button oper-
ation settings to initial default. [Yes]/ [ No].
Power
frequency
Light Frequency should be set to either
60Hz or 50Hz depending on your region.
[50HZ] / [60HZ].
TV Out
TV Out should be set to either NTSC or PAL
depending on your region. [NTSC] / [PAL].
Menu item
Function
USB Mode
You can use this car camcorder as a PC
camera or removable disk.
[PCCAM]: Use as a PC camera;
[MSDC]: Use as a removable disk.
2. Press the MENU button again to select [Setup].
3. Use the UP or DOWN button to select an item.
4. Press the OK button to enter the submenu.
5. Use the UP or DOWN button to select the desired
item.
6. Press the OK button to confi rm the setting.
7. Press the MENU button to close the menu.
Playback
Playback still image
1. Turn the car camcorder on, and then press the
MODE button to set the car camcorder to playback
mode. The latest recorded fi le appears on the LCD
screen. If there are no images stored, a message [No
Image] appears.
2. Press the UP/DOWN button to preview the previous
or next image.
Playing back movie clips
1. Press the UP/DOWN button to select the movie clips
you want to playback.
2. Press the OK button to start playing. Press the UP/
DOWN button to end playing. Press the OK button
to pause it and press it again to continue.
Menu in playback mode
1. In playback mode press the MENU button to display
the menu.