Www.U-lineservice.Com 2 11/2007 full overlay drawer panels drawer panel preparation full overlay drawer panels completely cover the drawer fronts and handles to give a built-in appearance. Overlay units are shipped ready for full overlay installation. Note: for standard installations, both drawers m...
11/2007 3 www.U-lineservice.Com caution it is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed. 4. Remove tape adjoining the panels and enlarge the five holes in the drawer panel using a 0.201" (#7) drill. 5. ...
Www.U-lineservice.Com 4 11/2007 adjusting drawer alignment warning shock hazard — the unit must be unplugged from the wall outlet during drawer removal, adjustment and re-installation. Drawer removal 1. Confirm that the unit is unplugged from wall outlet. 2. Unplug the drawer’s connection wiring (to...
11/2007 5 www.U-lineservice.Com minor adjustment: note: the mounting holes on the slide are slightly larger than the screws’ diameter. 1. Loosen one slide’s mounting screws. 2. Level the slide. 3. Retighten the screws. See figure 12. 4. Repeat procedure for the other slide. Severe adjustment: note: ...
?2007 u-line corporation publication no. 30198e 11/2007 rev. B u-line corporation, located in milwaukee, wi, is a family operated manufacturer of built-in undercounter icemakers, combo ® icemaker/refrigerators, wine captain ® wine storage units, refrigerators, refrigerated drawers and refrigerator/f...
