U-Line Origins 1075BEVS00 Use And Care Manual - page 5
1075BEV
3
PRODUCT FEATURES
Origins Beverage Center
Model 1075BEV Beverage Center will accommodate up to
16 standard 750 mL bottles of your favorite wines on its
two upper, 3/4 extendable, sliding wine racks. The
Beverage Center also provides generous storage for non-
wine beverages on two tempered shelves.
The Right Temperature for Wine
Your Beverage Center has been designed to provide two
temperature zones within the cabinet so the specific
storage requirements of your beverages can be satisfied.
The upper wine rack zone maintains an approximate
temperature of 45°F, and the lower shelf zone maintains
an approximate temperature of 38°f.
NOTE: Product temperatures, not air temperatures, are
referenced above.
• An interior light will illuminate automatically as the
door is opened, providing easy visual identification of
the contents. You can also select another mode of
operation:
The interior light can be illuminated continuously
while the door is closed, providing a visible display of
the Beverage Center contents.
• The upper chrome wine racks have a maple front trim
that adds an attractive appearance to this model. The
wood facing may be stained or replaced in its entirety
with other woods or manufactured products (such as
Corian
®
or Sandstone).
• The wine racks slide out, and are 3/4 extendable,
providing access to all wine bottles, including those
located on the rear portion of the rack.
• This model features maintenance-free automatic
(cycle) defrost.
• The Model 1075BEV is only available in stainless steel.
• The Model 1075BEV features a stainless steel door
frame and hinges with black cabinet and grille.
• The door features a full length handle and tinted
thermal glass that protects your wines from potentially
harmful light rays while providing a very stylish
appearance.
• The door is not field-reversible.
Features and specifications are subject to change without
notice.
OPERATION
Air Flow
Figure 1
IMPORTANT
IMPORTANT
Proper air flow (Figure 1) is required for your unit to
operate at its highest efficiently. A grille, located in
the base of the unit, must not be blocked at any
time, or your unit will not perform as expected.
Initial Startup
All U-Line units are shipped with controls that are preset.
No initial adjustments are required.
IMPORTANT
IMPORTANT
U-Line recommends the unit be allowed to run
overnight prior to loading with product.
To turn the unit off, turn the controller knob located in
the center of the grille counterclockwise until a “click” is
heard. It may take some force to get the control to
“click”.
To turn the unit on, turn the controller knob located in
the center of the grille to a MID setting, number 3 or 4 on
the controller knob.
Temperature Control
ADJUSTING TEMPERATURE
Figure 2
Adjust the temperature by turning the numbered dial
(Figure 2) in small increments.
Many factors can affect the internal temperature of the
cabinet. They include:
• Temperature setting.
ULIN_0228_A
ULIN_0229_A