U-Line Origins 1115WCS00 Installation Manual - page 6
www.U-LineService.com
6
07/2006
1115R and 1115WC Models
Reversing the Door
(1115R & 1115WC Black Units Only).
Black Model 1115R
To reverse the door, perform the following:
1. Remove the grille and grille cap (two screws).
2. Remove top hinge from cabinet (three screws) (Figure
4). Hold door to keep it from falling.
3. Lift the door off the bottom hinge.
4. Remove bottom hinge from cabinet (two screws)
(Figure 5).
5. Remove screws on opposite side of cabinet (Figure 6).
Note that there may be a nut behind one or both
screws on either side.
6. Install hinge on opposite side, bottom of cabinet
(Figure 7). Replace nut on back side where installed.
Align hinge outer edge with cabinet before tightening
screws.
ULIN_0143_A
Figure 4
ULIN_0121 _A
Figure 5
ULIN_0122 _A
Figure 6
ULIN_0123 _A
Figure 7
1
ULIN_0109_A
Figure 8