1. DL manuals
  2. U-Line
  3. Ice Maker
  4. U-ADA15IMB-00B
  5. Quick Start Manual

U-Line U-ADA15IMB-00B Quick Start Manual

Manual is about: 115 V / 60 Hz & 220-240 V / 50 Hz

Summary of U-ADA15IMB-00B

  • Page 1

    Quick start guide ice makers • 115 v / 60 hz & 220-240 v / 50 hz.

  • Page 2

    Quick start guide u-line.Com welcome to u-line congratulations on your u-line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-line continues to be the american leader, deliverin...

  • Page 3

    Quick start guide u-line.Com contents 1 model list 3 safety and warning 4 environmental requirements 5 electrical 6 water hookup 9 door swing 10 door latch 11 general installation 12 integrated panel installation 14 first use 14 ice 15 warranty.

  • Page 4

    Quick start guide 1 u-line.Com model list this guide provides the basics to get you started. Looking for more information? Visit u-line.Com to view detailed user guides for all u-line products. Crescent ice makers u-bi1215s-00b u-bi1215int-00b u-bi1215b-00b u-bi1215w-00b ada height compliant series ...

  • Page 5

    Quick start guide 2 u-line.Com marine series uln-bi95fcb-03a uln-bi95fcb-20a uln-wh95fc-03a uln-wh95fc-20a uln-ss1095fc-03a uln-ss1095fc-20a uln-ss1095fd-03a uln-ss1095fd-20a uln-ss1095nf-03a uln-ss1095nf-20a uln-sp18fcs-03a uln-sp18fcs-20a uln-sp18fcb-03a uln-sp18fcb-20a uln-sp18fcw-03a uln-sp18fcw...

  • Page 6

    Quick start guide 3 u-line.Com safety and warning notice please read all instructions before installing, operating, or servicing the appliance. Safety alert definitions throughout this guide are safety items labeled with a danger, warning or caution based on the risk type: danger ! Danger means that...

  • Page 7

    Quick start guide 4 u-line.Com caution ! Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges. If your model requires defrosting, do not use medical devices or other means to accelerate the defrosting process. Do not use an ice pick or other sharp instru...

  • Page 8

    Quick start guide 5 u-line.Com 220-240 v units this model is intended for indoor/interior applications only and is not to be used in installations that are open/ exposed to natural elements. This unit is designed to operate between 50°f (10°c) and 90°f (32°c). Higher ambient temperatures may reduce ...

  • Page 9

    Quick start guide 6 u-line.Com the unit requires a grounded and polarized 115 vac, 60 hz, 15a power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. A gfci (ground fault circuit interrupter) is usually not required for fixed locati...

  • Page 10

    Quick start guide 7 u-line.Com • the water line must have a shut-off valve in the supply line. • the water line should be looped into 2 coils. This will allow the unit to be removed for cleaning and servicing. Make certain that the tubing is not pinched or damaged during installation. Warning ! Conn...

  • Page 11

    Quick start guide 8 u-line.Com 6. Turn on water supply and check for leaks. 7. Reinstall the grille (plinth strip/base fascia) and access panel (if equipped) along with the back panel. 8. Install retaining clip. Rear mounted valve prepare plumbing the water valve uses a standard 1/4" (6.35 mm) compr...

  • Page 12

    Quick start guide 9 u-line.Com caution ! Turn off water supply and disconnect electrical supply to unit prior to installation. Use caution when handling back panel. The edges could be sharp. 1. Turn off water supply and disconnect electrical supply to product prior to attempting installation. 2. Rem...

  • Page 13

    Quick start guide 10 u-line.Com stainless steel and black and white models require 2-1/8" (54 mm) door clearance to accommodate the handle if installed next to a wall. Integrated models require 1/4" (6 mm) clearance if installed next to a wall. Allow for additional space for any knobs or pulls insta...

  • Page 14

    Quick start guide 11 u-line.Com general installation marine and bi series leveling information notice because these units do not have leveling legs, it is extremely important that they sit on a level surface. If they are not level, the ice mold will not fill evenly. Use a level to confirm the unit i...

  • Page 15

    Quick start guide 12 u-line.Com installation 1. Plug in the power/electrical cord. 2. Gently push the unit into position. Be careful not to kink the water supply line or entangle the cord. 3. Re-check the leveling, from front to back and side to side. Make any necessary adjustments. The unit’s top s...

  • Page 16

    Quick start guide 13 u-line.Com crescent ice makers and ada15im 1. Fully open door/drawer. 2. Starting at corner, pull gasket away from door/ drawer. 3. Continue to pull gasket free from gasket channel. 4. Upon removal, lay gasket down on a flat surface. 5. Partially loosen the 3 screws, securing th...

  • Page 17

    Quick start guide 14 u-line.Com 13.Be sure the screws force their way past the opening on the gasket channel and sit flush against the bottom of the channel. 14.Remove clamps from door/drawer. If panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust panel ...

  • Page 18

    Quick start guide 15 u-line.Com during periods of limited use or high ambient temperatures, it is common for cubes to fuse together. Gently shake the bucket to break apart cubes. If not using the ice maker regularly, empty the ice bucket periodically to ensure fresh cubes. It is normal for cubes to ...

  • Page 19

    Quick start guide 16 u-line.Com 7. If any applicable national law provides for a minimum mandatory warranty period that is longer than the aforementioned period of two years from the date of purchase, such longer period shall apply. 8. This limited warranty is in lieu of any and all other warranties...