U-Reach MD801 User Manual - II. Function
11
II. Function
(MulitMedia Duplicator)
4. When the copy task has finished, the system will close the session.
5. The disc will be ejected, and you can continue to copy another memory
card or USB, or you can keep it for next copy task.
In Disc Spanning Mode:
1. Plug a Flash device (ex: USB, SD, MMS…) into the proper slot as source
and place a disc into burner as target for duplication.
2. Select 1. Copy and press to start copying.
**Note:
1 As long as the disc was a multi-session disc, it will not support
disc spanning copy.
2 If the data size is larger than the disc’s capacity, the system
will require you to put more than one disc. Please make sure
the disc spanning function is enabled, you can set it up in 6-2.
Disc spnning, page 17.
3 Rewritablediscdoesnotsupportmulti-sessioncopy.Due to
the feature of CD±RW and DVD±RW rewritable format, the
first session can be copied successfully, but when you want to
build up the second one, the system will erase the first session
of +RW format disc, and an error message “Not Blank Disc”
for –RW format disc.