1. DL manuals
  2. U-Reach
  3. Storage
  4. UB300
  5. User Manual

U-Reach UB300 User Manual

Manual is about: Flash Duplicator

Summary of UB300

  • Page 1

    Flash duplicator user guide 2 sec. Real capacity check 2 sec. Real capacity check .. Y ty y 3 sec. Flash speed check 3 sec. Flash speed check 2 22 2 re r re 1 sec. Check 1 sec. Check 1 111 33mb per second data copy 33mb per second data copy an easy yet powerful ca rriageable copier an easy yet power...

  • Page 2: Content

    Content content i. Product introduction ...................................................................................................... 2 1. Overview .................................................................................................................. 2 2. Features .................

  • Page 3: I.  Product Introduction

    I. Product introduction i. Product introduction 1. Overview the flash duplicator is a stand alone, high speed and convenient equipment for easily copy data anytime and quickly check flash device’s quality. The checking capability assists you to find out defective flash device efficiently, like capac...

  • Page 4: 4.  Basic Instruction

    I. Product introduction 4. Basic instruction a. System overview b. Back side power switch and plug of the power supply c. Lcd configuration forward backward lcd usb target port signal led usb master port esc ok power switch power supply copy 870m 21% 0:20 275m copy progress time (mm:ss) copied size ...

  • Page 5: 5.  Function Table

    I. Product introduction 5. Function table function description 1. Copy usb/sd/micro sd/cf flash copy. 2. Compare thisoptionmakesbit-by-bitcomparisonbetweenthemastersourceandallothercopiedflash cards. 3. Copy+compare thisoptionwillmakeacopyfirstandthencomparethecopiedflashdeviceswiththesource immedia...

  • Page 6: II. Function Introduction

    Ii. Function introduction ii. Function introduction 1. Copy it copies data from source flash device to target flash devices. The default setting of copy area is “data only”. If you like to change copy area from “data only” to “ whole hdd” or “all partitions”, please refer to function [5.1 copy area]...

  • Page 7: 2.  Compare

    Ii. Function introduction 2. Compare it is used to check if the data on source flash device is identical to the copied flash devices after duplication. Steps of compare: plugflashdevicesintoduplicator→select[2.Compare]→press [ok]→compare processing→comparefinished→press [esc] to finish compare. ** d...

  • Page 8: 4.  Utility

    Ii. Function introduction 4. Utility 4.1 device info. This function will show flash device’s general information includes capacity, format and data size. Steps of show flash device’s info.: 1. Plug flash devices into duplicator→select [4. Utility ]→press [ok]→select [4.1 device info. ]→press [ok]→sy...

  • Page 9: 4.3 Capacity Check

    Ii. Function introduction 2. Press [forward] / [backward] to check other flash devices’ virus→press [esc] to finish 4.3 capacity check this function is to check flash device’s real capacity and exam the flash devices can work or not. Steps of check flash device’s real capacity: 1. Plug flash devices...

  • Page 10: 4.5 Measure Speed

    Ii. Function introduction steps of formatting flash device: 1. Plug flash devices into duplicator→select [4. Utility ]→press [ok]→select [4.4 format fat]→press [ok]→system format the flash devices 2. Press [forward] / [backward] to check other flash devices’ format status→press [esc] to finish. 4.5 ...

  • Page 11: 4.6 Erase Content

    Ii. Function introduction 4.6 erase content this function is to erase flash device’s fat data content, it will not erase the flash fat16/32 format. If format is not fat16/32, ie. Ntfs, the quick erase will not execute. ** the source port (port #1) does not execute erase function. Steps of erasing fl...

  • Page 12: 5.  Setup

    Ii. Function introduction 5. Setup 5.1 copy area there are two options for copy: only data area and whole media. 5.1.1 only data area: this function is to set the copy mode to copy data area only. It is faster than copy whole flash. It will automatically analyze the source flash device’s file format...

  • Page 13: III.  Faq

    Iii. F aq iii. Faq q1: can i use ub300 to copy other flash devices such as micro sd? A1: some users may use a usb card reader to copy other different types of flash device, such as sd, cf, and memory stick etc. Due to the quality and stability of usb card reader in market are different, a poor-quali...

  • Page 14

    Iii. F aq q5: can i copy data by usb hdd? A5: yes, but please provide enough power current to both the system and usb hdd while copying. ● thesystemneedsmorepowercurrentthan2a,5vforcopyusbhdd,youneedto change the adapter to 5.5v, 4a. ● someusbhddsneedtoplug2usbpowersupplytokeepastablepowersupply (so...

  • Page 15: IV. Specification

    Iv .Specification iv. Specification model ub300 target 1:2 operation stand alone support media usb1.1 / usb2.0 sd / sdhc / micro sd / mmc / mini sd / cf (by usb multimedia card reader) display 2*16 monochrome lcd display control button 4 push buttons ( forward , backward, ok, esc) led led(green/red)...