V-Chip Microsystems VT-CC1110-433M User Manual - Data Transmission
COPYRIGHT @ 2012 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd VERSION: VT-CC1110-APR-2012
VT-CC1110-433M
Data Transmission
The CC1110 contains a 64 byte FIFO for data to be transmitted, built-in hardware support for packet oriented
radio protocols, e.g. Preamble bytes, Synchronization Word, Whitening the data, CRC checksum, Interleave and
Forward Error Code, Address checksum. The SPI interface is used for sending commend control and writing to
the TX FIFO.
The format of the data packet can be configured and consists of the following figure:
In addition, CC1110 supports fixed packet length protocols, variable packet length protocols and infinite packet
length. Details refer to the CC1110 datasheet.
Configuration Registers
The configuration of CC1110 can be done with software SmartRF Studio7. Complete descriptions of the registers
are given in the CC1110 datasheet. We can provide evaluation board and demo code to the customer to develop
and evaluate the module’s capability.
Dimension
24mm
1mm
1.6mm
R0.25mm
R0.35mm
R0.5mm
R0.35mm
ANT
1mm
12.65mm
19mm
25.9mm
0.9mm
12.75mm
24.5mm
1.67mm
1.27mm
P1_0
RESET
GND
GND
P1_5
P1_3
P1_4
P1_7
P1_6
P1_2
P0_2
P0_3
P0_4
P0_5
P1_1
P2_0
P2_1
P2_2
P0_0
ANT
VCC
VCC
P0_6
P0_7
0.9mm
0.75mm
21.55mm
5.6mm
2.54mm
R0.8mm
R0.425mm
R0.29mm
R0.6mm
1.6mm
6.68mm
1.6mm