V-Chip Microsystems VT-CC1110PA-470M User Manual - General
COPYRIGHT @ 2012 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd
VERSION:
VT-CC1110-APR-2012
VT-CC1110PA-470M
VT-CC1110PA-470M
VT-CC1110PA-470M
VT-CC1110PA-470M
Wireless sensor networks
General
General
General
General Characteristics
Characteristics
Characteristics
Characteristics
Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.
Parameter
Parameter
Parameter
Parameter
Type
Type
Type
Type
Condition/Note
Condition/Note
Condition/Note
Condition/Note
Operating supply voltage
DC 2.4~3.6V
Central frequency
470MHz
Can be programmable to other frequency in bands
470±5MHz
Frequency accuracy
±10KHz
Modulation format
GFSK/2-FSK/ASK/OOK/M
SK
Programmable
Transmit power
-10~+20dBm
Programmable
TX current consumption
<110mA
Po=20dBm
Receiver sensitivity
-110dBm
2.4Kbps
RX current consumption
<22mA
2.4Kbps
Sleep State current consumption
<2uA
Power Mode 3
Data rate
1.2~500Kbps
Programmable
Spurious harmonics
< -30dBm
TX power +10dBm.
Communication distance
>800m
2-FSK modulation, 2.4Kbps data rata, +20dBm
output power.
Antenna impedance
50ohm
PCB antenna
Operating temperature
-20~+75 °C
Storage temperature range
-50~+125°C
Dimension
31.5 mm×27.0 mm×13.1mm
See more in PCB description
Note
Note
Note
Note:
1. The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the
distance, and the lower the receiving sensitivity.
2. The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the
voltage, the lower the TX power.
3. The module central frequency will change as the operating temperature change, use it under suggest temperature,
the module can work well.
4. The antenna will strongly affect the communication distance, please select matched antenna and connect it
correctly.
5. The module mount will affect the communication distance.