V-Chip Microsystems VT-CC2500PA-M1 User Manual - Data
COPYRIGHT @ 2012 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd
VERSION:
VT-CC2500-APR-2012
VT-CC2500-M1
VT-CC2500-M1
VT-CC2500-M1
VT-CC2500-M1
Data
Data
Data
Data Transmission
Transmission
Transmission
Transmission
The CC2500 contains a 64 byte transmit/receive FIFOs, built-in hardware support for packet oriented radio
protocols, e.g. Preamble bytes, Synchronization Word, Whitening the data, CRC checksum, Interleave and
Forward Error Code, Address checksum. The SPI interface is used for sending commend control and writing to
the TX FIFO.
The format of the data packet can be configured and consists of the following figure:
In addition, CC2500 supports fixed packet length protocols, variable packet length protocols and infinite packet
length. Details refer to the CC2500 datasheet.
Configuration
Configuration
Configuration
Configuration Registers
Registers
Registers
Registers
The configuration of CC2500 can be done with software SmartRF Studio7. Complete descriptions of the registers
are given in the CC2500 datasheet. We can provide evaluation board and demo code to the customer to develop
and evaluate the module’s capability.