V-Chip Microsystems VT-CC2530PA-Z1 User Manual - General Characteristics
COPYRIGHT @ 2012 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd VERSION: VT-CC2530-APR-2012
VT-CC2530PA-Z1
General Characteristics
Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.
Parameter
Type
Condition/Note
Operating supply voltage
DC 2.4~3.6V
Central frequency
2394-2507MHz
Programmable
Frequency accuracy
±30KHz
Modulation format
O-QPSK
Transmit power
≤20dBm
Programmable
TX current consumption
<160mA
Po=20dBm
Receiver sensitivity
-108dBm
RX current consumption
<24mA
Sleep State current consumption
<0.4uA
Power Mode3
Data rate
250kBaud
Programmable
Communication distance
1000m
At open area
Antenna impedance
50ohm
Operating temperature
-20~+85 °C
Storage temperature range
-40~+125°C
Dimension
20 mm×33mm×2.4mm
See more in PCB description
Note:
1. The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the
distance, and the lower the receiving sensitivity.
2. The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the
voltage, the lower the TX power.
3. The module central frequency will change as the operating temperature change, use it under suggest temperature,
the module can work well.
4. The antenna will strongly affect the communication distance, please select matched antenna and connect it
correctly.
5. The module mount will affect the communication distance.