V-Sun TLT-3 User Manual - page 23
TLT-3 GPS/GSM
Vehicle Tracker User Manual
V1.0
23
7. From here instructions immediately
Instruction Format: # 806 # user password # #
example: # 806 # 0000 # #
Description: When TLT-3 receiving the order, confirm user password is correct, the
first stored number to send a confirmation SMS "START GPRS UPLOAD "while the server
sends the current store of data. From the data in the state prompted for the "SMS".
Upload format: # IMEI number # user name # service password # # status # data
base of information $ GPRMC ... ... .. # base station information $ GPRMC ... ....
# #
example:
#123456789000001#SR-6869BE#0000#SMS#3
#25ee0dff$GPRMC,083945.180,A,2233.4249,N,11406.0046,E,0.00,315.00,251207,,,A*6E
#25ee0dff$GPRMC,083950.180,A,2233.4249,N,11406.0046,E,0.00,315.00,251207,,,A*6E
#25ee0dff$GPRMC,083955.180,A,2233.4249,N,11406.0046,E,0.00,315.00,251207,,,A*6E
##
Note: The data format immediately upload status: SMS.
8. Calling switch instruction
Calling off instruction format: 150 + user password
for example: 1500000
calling open instruction format: 151 + user password
for example: 1,510,000
Description: When the TLT-3 before calling the relevant instructions to confirm the
user password is correct, close the calling function ( including the SOS distress,
power failure alarm calling, fence alarm calling, speed alarm, etc), after the success
of the sender to send the confirmation to the "SET VOICE CALL: OFF". When TLT-3 before
calling open order, confirm the user password is correct, open the calling features
(including the SOS distress, power failure alarm calling, fence alarm calling, speed
alarm, etc), after successfully sending a confirmation to sender "SET VOICE CALL: