V-Sun V3338 Instruction Manual - page 23
V3338
V3338
V3338
V3338 P
P
P
Personal
ersonal
ersonal
ersonal P
P
P
Positioning
ositioning
ositioning
ositioning Tracker
Tracker
Tracker
Tracker Instruction
Instruction
Instruction
Instruction Manual
Manual
Manual
Manual V3.0
V3.0
V3.0
V3.0
23
23
23
23////34
34
34
34
Instruction format: 006 + user password + GX, IO/I/O, E/W longitude upper limit + N/S latitude upper limit,
E/W longitude lower limit + N/S latitude lower limit.
For example: 0060000G1,IO,E114.10004N22.55705,E115.10006N23.55706
After receiving the instruction, V3338 will return confirmation message: SET SQUARE GEO-FENCE GX
(IO/I/O) OK.
Description: GX is geo-fence X, whose value range is [1, 16]. IO means warning for both outgoing and
incoming fence; I means warning for incoming fence; O means outgoing fence. Longitude and latitude value take
degree as unit. 5 digits after decimal point shall be reserved and 0 shall not be omitted.
IO means warning for both outgoing and incoming fence; I means warning for incoming fence; O means
outgoing fence.
Note: (1) After setting is completed, fence is turned on automatically. Now, default fence type is IO, i.e.,
warning for both outgoing and incoming fence.
(2) If calling status is off, message will be sent to prestored user in SMS mode instead of calling him.
(3) Value set by the instruction is not subject to power off or switch on/off until change instruction or
restoration operation is received again.
(4) After restoration, longitude value is indicated by 0. Fence is in shutoff status.
1>Turn
1>Turn
1>Turn
1>Turn on
on
on
on square
square
square
square geo-fence
geo-fence
geo-fence
geo-fence
Instruction format to turn on all square geo-fence: 311 + user password
For example: 3110000
Instruction format to turn on single square geo-fence: 311 + user password +GX
For example: 3110000G5
Description: The instruction is used to turn on all square geo-fence and turn on single square geo-fence. GX
stands for geo-fence X, whose value range is [1, 16]. After receiving the instruction, V3338 returns confirmation
message: SET ALL SQUARE GEO FENCE: ON. When turning on single square geo-fence, it returns confirmation
message: SET SQUARE GEO FENCE GX: ON.
2>Instruction
2>Instruction
2>Instruction
2>Instruction to
to
to
to turn
turn
turn
turn off
off
off
off square
square
square
square geo-fence
geo-fence
geo-fence
geo-fence
Instruction format to turn off all rectangular geo-fence: 310 + user password
For example: 3100000
Instruction format to turn off single rectangular geo-fence: 310 + user password +GX
For example: 3100000G5
Description: The instruction is used to turn on all rectangular geo-fence and turn on single rectangular
geo-fence. GX stands for geo-fence X, whose value range is [1, 16]. After receiving the instruction, V3338 returns
confirmation message: SET ALL SQUARE GEO FENCE: OFF. When turning on single square geo-fence, it