2 wire intercom system user manual dt-eng-27td7-v1 english monitor ... Manual monitor intercom user setup close about i main menu 1 2 3 4.
1 1. Parts and functions monitor ... Manual monitor intercom user setup close about i main menu 1 2 3 4 indicator digital tft lcd screen unlock button talk/mon button menu button microphone speaker connection port mounting hook 1 2 3 4 5 6 on dips l1 bt1 bt2 eh gnd vd l2 mounting hook lcd screen dis...
2 2. Monitor mounting 145~160 cm 1. Use the screws to fix the mounting bracket on the mounting box.(fitting accesories includes a bracket (two pieces of 4x25 screws are needed for fastening the mounting bracket), special 2 wire cables to connect with monitor) 2. Wire the system correctly(see the lat...
Ds-1 00:23 3 monitor select exit home camera 1 ... Camera 2 ... Camera 3 ... Camera 4 ... Monitor time set ... 5. Intercom function touch intercom item on main menu page,there are three items:intercom call...,inner call ...,direct call guard unit... Exit home intercom intercom call ... Inner call .....
4 1. Intercom call : user in one apartment can call other apartments in the system. The namelist will be created automatically by the system. Touch a name you want on the screen, then touch icon to dial.(note:1. Touch icon again to redial. 2.The dip switches code of each monitor must set different.)...
5 7. Date and time setting touch user setup item on main menu page to enter setup page, touch clock... Item. A digital keypad will be showed on screen, input date and time by touching the digital keypad,use * key to select the setting item. After finish, touch icon to save and exit.(touch icon to ca...
9. Restore to default touch user setup item on main menu page to enter setup page,then touch next page item to enter user setup 2 page, touch restore to default item ,a message will be asked to confirm the restore operation. If touch icon ,all settings will be restored to default, if you don't want ...
How to set the monitor panel on in default mode,when receive a calling,the master and slave monitors will ring at the same time,and just the master monitor can display the image while the slave monitors can not.But the settings can be changed,you can set the master monitor and all the slave monitors...
The unlock time can be changed by yourself at any time.It can be set from 1 to 9 seconds. The code number from 8021 to 8029 are used to set the unlock time to 1~ 9 seconds. Unlock time: how to set the menu language the monitor can support multi languages and it is so simple and fast, just input the ...
11. Screen and volume adjustment during monitoring or talking, touch icon,the adjust menu will be displayed. Touch and select the adjustment item you want; touch / icon to decrease / increase the value. 1. The first item is scene mode selection: total 4 screen modes can be selected in sequence: norm...
Note 10
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. Dt-eng-27td7-v1.
