2 wire intercom system user manual dt-eng-37td7-v1 english please read this manual carefully before using the product, and keep it well..
-1- 1. Parts and functions digital tft lcd screen connection port speaker mounting hook unlock button microphone talk/mon button menu button 1 2 3 on dips l1 l2 lcd screen display the visitors' image unlock button press to release the door menu button press to open the menu shortcuts talk/mon button...
2. Monitor mounting 145~160 cm 1. Use the screws to fix the mounting bracket on the mounting box.(fitting accesories includes a bracket (two pieces of 4x25 screws are needed for fastening the mounting bracket), special 2 wire connectors to connect with monitor) 2. Wire the system correctly(see the l...
4. Basic door release operation 1. Press call button on outdoor station, the monitor rings, at the same time, the screen displays the visitors' image. 2. Press talk/mon button on monitor or touch icon on screen, you can communicate hands free with the visitor for 90 seconds.After finishing communica...
[ 00 ] jim. Zhang [ 01 ] calo. Liu [ 02 ] jacko. Zhang [ 03 ] philips. Chen [ 04 ] hebe. Zhang [ 05 ] tony. Li 2. Inner call : if multi slave monitors are installed in the same apartment, select inner call, all the other monitors will ring at the same time, whichever monitor answers the call, conver...
8. Basic setup instructions ring tone settings touch user setup item on main menu page to enter setup page.Touch door station call tone, inercom call tone or doorbell tone item, there are 12 pieces ring tones can be selected.Touch a ring tone you want, then touch icon to save the setting and exit.(t...
Date and time set monitor time settig touch user setup item on main menu page to enter setup page, then touch clock item, input digitals by pressing the digital keypad. Y->year, m->month, d->date, w->week, h->hour, m->minute, s->second. Press icon to cancel the setting location,and press icon to sav...
Restore to default the restore to default function allows the user to recover the settings to factory setting. Note that the restore to default operation will not change the setting and datas. Enter main menu page,then touch user setup icon to enter the setting page, press restore to default item, t...
A monitor can be assigned as guard unit monitor; when the guard unit monitor answers the call, conversation with the guard person is started.. The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this function. How to set the monitor as a guard monito...
The unlock time can be changed by yourself at any time.It can be set from 1 to 9 seconds. The code number from 8021 to 8029 are used to set the unlock time to 1~ 9 seconds. Unlock time: how to set the unlock parameter there are two unlock modes: 1.Power-on- to-unlock type:unlock mode=0(by default) 2...
10. Specification 11. Precautions ● ● power●supply●for●indoor●monitor:●● ● dc●24v● ● ● power●consumption:● ●● standby●38.4ma;●working●320ma ● ● monitor●screen:● ● 7●inch●digital●color●lcd ● ● display●resolutions:● ● 800*3(r,●g,●b)●x●480●pixels ● ● video●signal:● ● 1vp-p,●75Ω,●ccir●standard ● ● wirin...
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. Dt-eng-37td7-v1.
