1. DL manuals
  2. V-Tec
  3. Monitor
  4. VT27
  5. User Manual

V-Tec VT27 User Manual

Manual is about: 4 Wire Video Intercom System

Summary of VT27

  • Page 1

    Vt27 user manual(en) 4 wire video intercom system read this manual carefully before using the product, and keep it well for future use. 1 2 3 4.

  • Page 2: 1. Parts and Functions

    1. Parts and functions 1 2 3 4 indicator 1 digital tft lcd screen unlock button talk/mon button menu button microphone speaker connection port sd card slot indicator 2 mounting hook mounting hook lcd screen display the visitors' image indicator1 show the working status of monitor indicator2 light on...

  • Page 3: 2. Monitor Mounting

    2. Monitor mounting 3. About main menu 145~160 cm accessory fittings: 1) mounting bracket and special 4 core wire 2) two screws of 4x25 are used to fasten the mounting bracket on the wall. Installation steps: ■ installation height for indoor monitor usually is 145- 160cm (refer to sketch map) ■ atta...

  • Page 4: 4. System Wiring

    4. System wiring terminal discription basic connection js-os1 input 1 input 2 output js-ap handset 75 ohm power jp/vd dc-in dc- dc+ js-os2 js-vd 1r 12v 2w 4b 2w 3y 4b 1r 2w 3y 4b 1r 2w 3y 4b 1) dc-in:power supply connection port 2) jp/vd:jp/vd is used for setting the video impedance. 3) js-ap:audio ...

  • Page 5: Extending Monitors

    Extending monitors wh ite red yel low bla ck d oor station c am er a note:to the f irst & last monitor,j p/vd jum per should reserve! Others should remove. 1 # monitor 2 # monitor n # monitor jp/ v d r em o ve d ! Jp/ v d r es er ve d jp/ v d r es er ve d ps ps ps 4 4 4 extending audio phone: a c ~ ...

  • Page 6: Extending 2 Outdoor Stations

    Extending 2 outdoor stations jp/ v d r eserve! Bla ck yel lo w red wh ite wh ite red yel lo w bla ck 2 # c am er a 1 # c am er a 1 # c am er a 2 # c am er a 1 # monitor note: 1. To the first & last monitor,jp/v d jumper should reserve! Others should remove . 2.When connect two outdoor sta tions, 2 w...

  • Page 7

    1r 2w 3y 4b 1r 2w 3y 4b vt -mds cctv or door station door station door station door station door station bla ck yel low re d wh ite bla ck yel low re d wh ite set ds4 ds3 ds2 ds1 1# 2# 3# 4# jw_vp jw_vp user code=1 user code=2 user code=n(n 1 2 3 4 1 2 3 4 1 2 3 4 reserve reserve remove note:to the ...

  • Page 8: Answering A Door Call

    5. Basic door release operation 1. Press the call button on door station. 2. The monitor rings,and the visitor's image will be seen on screen. Note:the screen turns off after 30 seconds(default) if nobody answers. 3. Press either talk/mon button on monitor or touch talk icon on screen, you can commu...

  • Page 9: 6. Intercom Function

    ► “ ” means the current operating monitor. ► “ ” means the selected calling monitor. ► each monitor is configed one unique user code ！ 6. Intercom function intercom can be initiated by any monitor. Touch intercom or inner call item on main menu page. Intercom function is activated when multi monitor...

  • Page 10: 7. Memory Sharing

    7. Memory sharing wiring diagram for memory sharing vt -bdu 4b 3y 2w 1r 4b 3y 2w 1r 4b 3y 2w 1r 4b 3y 2w 1r vt-bdu jw/vp1 jw/vp2 jw/vp3 jw/os hi 75r 150r set-3y set -3y a c ~ 1 2 3 4 1 2 3 4 a c ~ 1 2 3 4 a c ~ 1 2 3 4 wh ite red yel low bla ck d oor station a c ~ b ac k v ie w user code=1 vt27sd/td...

  • Page 11: Playing Time Setting

    Memory sharing means that the slave monitors(user code=2/3/4/5,refer to part 9->user code) can view the pictures from the master monitor(user code=1,refer to part9->user code),but the master monitor must be with sd card model which has picture memory function.Touch memory playback icon on main menu ...

  • Page 12: Date and Time Setting

    Date and time setting day time setting screen setting there are two formats for date and time display, refer to part 9->date/time format. Touch user setup ->>calendar. Use "cancel" key to select the setting item. After finishing, touch "save" key to perform the setting. The day time setting is used ...

  • Page 13: 9. Basic Setup Instructions

    9. Basic setup instructions ring tone settings touch user setup item on main menu page to enter setup page.Select master call tone, slaver call tone or intercom call tone item, there are 12 pieces ring tones can be selected.Touch a ring tone you want, then touch icon to save and return last page.But...

  • Page 14

    10. Monitor parameter setting touch user setup ->>installer setup, total 16 setting items will be displayed on screen. Just input the corresponding value by touching the digital keypad to modify the setting. -13- item description default value time format 2 formats can be selected.[0]:24 hours forma...

  • Page 15

    -14- item description default value remote control used to add the remote controller or delete remote controller,[0]:delete remote control;[1]:add remote control. 0 staircase light staircase light can be set.[0]:don't light on at any time when receive calling;[1]:light on at night only when receive ...

  • Page 16: 11. Specification

    Printed in china / 2011. 09 the design and specifications can be modified without notice to the user. Right to interpret and copyright of this manual are preserved. 11. Specification ● power supply: dc16-24v ● power consumption: standby 1.2w,working 8w ● monitor screen: 7 inch digital tft ● display ...