V-Zon TF3DVD7019 Instruction Manual - Basic Operations
18
BASIC OPERATIONS
Adjusting the Volume
Turn the Volume Control dial to adjust the volume level up or down.
•
Disc Error Messages
The following messages will be displayed on-screen if there is a problem with the format of the loaded disc.
WRONG REGIONAL DISC.
•
The region code of the disc does not match the player’s region code (Region
1).
WRONG PASSWORD.
•
The parental rating level of the disc is higher than the parental rating level setting
of the player. The player will not play the disc.
BAD DISC. T
•
he player is equipped with automatic disc quality detection software. If the player detects
a disc that is damaged or has a format problem, it may play the disc at a lower quality or stop play com-
pletely, depending on how damaged the disc is.
Note:
DVD disc production quality may vary; some discs may deviate from the industry standard.
Some incorrectly-formatted discs may still play, however, the playback and operational quality of the disc may
be substandard.
Power Management
If the player will not be in use for a long period of time, set the Power Switch to the OFF position and unplug
the player.
2D/3D Display
This player using the state of the art glasses free 3D display technogy, it means you can enjoy the 3D video
without glasses. And it’s very convenient to switch between 2D and 3D display modes.
To view the videos (or images) in 2D/3D format:
1. If you want to view the normal (2D) videos/images in 3D, please press the 2D/3D button to select the “2D
to 3D Mode”, the player will convert the 2D videos/images into 3D format.
2. If you use this player to view a 3D video/image, just press the 2D/3D button to select the “3D to 3D Mode” .
3. If you want to view the videos/images in normal 2D format, please press the 2D/3D button to select the “By
Pass Mode”.
Note: The best position to view the 3D Video/Image is : The distance between the viewer’s eyes and the
screen is 85 centimetre, then move a little to the left or right direction.