1. DL manuals
  2. V2
  3. Gate Opener
  4. Calypso 400
  5. User Manual

V2 Calypso 400 User Manual

Summary of Calypso 400

  • Page 1

    Attuatore elettromeccanico irreversibile per cancelli a battente irreversible electromechanical actuator for swing gates operateur electromecanique irreversible pour portails battants operador electromecÁnico irreversible para cancelas batientes actuador electromecnico irreversÍvel para portÕes de b...

  • Page 2

    En glish 7 important remarks for any installation problem please contact our customer service at the number +39-0172.812411 operating monday to friday from 8:30 to 12:30 and from 14:00 to 18:00. V2 has the right to modify the product without previous notice; it also declines any responsibility to da...

  • Page 3

    E ng li sh 8 technical data calypso400 calypso500 calypso 400-120v calypso 500-120v max. Leaf lenght m 2,5 3 2,5 3 max. Leaf weight kg 400 500 400 500 power supply vac - hz 230 - 50 230 - 50 120 - 60 120 - 60 idling current a 1 1 2 2 full load current a 1,4 1,4 2,8 2,8 maximum power w 300 300 300 30...

  • Page 4

    En glish 9 installation layout calypso actuator cable 4 x 1 mm 2 blinker cable 2 x 1,5 mm 2 aerial cable rg-58 key or digital selector cable 2 x 1 mm 2 internal photocells cable 4 x 1 mm 2 (rx) cable 2 x 1 mm 2 (tx) external photocells cable 4 x 1 mm 2 (rx) cable 2 x 1 mm 2 (tx) safety edge (en 1297...

  • Page 5

    E ng li sh 10 installation measures to carry out a proper installation of the operator parts as well as to ensure the best automation performance, the measurement levels shown in the following table shall be complied with. Change the gate structure to adapt it to one of the cases in the table, if ne...

  • Page 6

    En glish 11 actuator fixing choose measures referring to the table you can find in the previous page, mark them on the pillars and continue as follows: • fix the clamps to the pillar and to the gate soldering directly; if the material does not allow it, it is necessary to solder the clamps to plates...

  • Page 7

    E ng li sh 12 to connect calypso with control unit warning: always remember to connect the earth according to current standards (en 60335-1, en 60204-1). Avoid tension in the cable during open and close operations. Emergency release in case of a blackout, the gate can be operated directly from the m...