V2 WISANT 19-230V User Manual - page 11
E
N
G
L
IS
H
9
TECHNICAL DATA
EC DECLARATION OF INCORPORATION
FOR PARTLY COMPLETED MACHINERY
(Directive 2006/42/EC, Annex II-B)
The manufacturer (*)
V2 S.p.A.
, headquarters in
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
WISANT 19-230V (*)
WISANT-35-400V
(*)
Description:
electromechanical actuator for sectional doors
-
is intended to be installed on
sectional doors
to create a
machine according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been declared
in conformity with the provisions of the Directive 2006/42/EC
(annex II-A).
-
is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC.
Electromagnetic Compatibility Directive 2004/108/EC.
The relevant technical documentation is available at the national
authorities’ request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65,
12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Cosimo De Falco
Legal representative of V2 S.p.A.
Racconigi, 16th January 2012
(*) made in extra EU Countries
MODEL
WISANT
19-230V
WISANT
35-400V
Door area
19 m
2
35 m
2
Power supply
230Vac - 50Hz
400Vac - 50Hz
Rated absorbed power
550 W
550 W
Torque
60 Nm
120 Nm
Shaft diameter
25,4 mm
25,4 mm
Average speed
22 rpm
22 rpm
Working cycle
30%
30%
Thermal protection
120°C
120°C
Working temperature
-20 ÷ +40 °C
-20 ÷ +40 °C
Protection degree
IP44
IP44
Motor weight
22
22
Limit switch range
19
19