V3SOUND VIENNA GRAND PIANO 3GB User Manual - page 4
CONNECT
To avoid possible damage to the loud speakers
or other connected electronic devices, always
connect all cables before turn on the amplifier.
Turn on the VIENNA GRAND first before tur-
ning on any active loud speakers or amplifiers.
Make sure the POWER switch on the
back of the device is in the OFF position
(LED light is not on).
Plug the power adapter that came with the
device into the DC port on the back of the
unit.
Plug the other end of the power adapter into
a power outlet. Make sure that the adapter is
compatible with the power supply.
Connect the audio outputs to an amplifier,
active loudspeakers or headphones.
Connect the MIDI-cable or the USB cable.
TO TURN ON
Before you turn the device on or off, make sure
that all connected audio devices that amplify
the audio signal (mixer, amplifier, active loud-
speakers) have their volumes turned down.
Turn the power on by pressing the
POWER ON/OFF switch on the back of
the device.
Turn down the MAIN VOLUME
potentiometer to maximum.
Adjust the volume on your mixer or
active loudspeaker.
Turn the volume on the VIENNA GRAND as
loud as possible, and adjust the sound on
your mixer.
4
9