V7 22" LCD TVs LTV22HD User Manual

Manual is about: LCD 19" Television

Page of 28

Download

Print this page

Bookmark us

WARNING Symbols

This symbol alerts you to dangerous voltage and the risk of electrical

shock.

This symbol identifies important operating and service instructions.

Safety instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this LCD TV near water.

6) Clean the LCD TV with a dry cloth only. Do not use liquid, alcohol, or aerosol

cleaners.

7) Do not block any ventilation openings. Install your LCD TV in a well ventilated area.

8) Keep your LCD TV away from moisture, excessive dust and any heat sources,

such as radiators, heat registers, stoves, or any other apparatus (including

amplifiers) that produce heat.

9) Do not remove the back cover. There are no user-serviceable parts inside.

10) Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The third prong is provided for your safety. If

the plug does not fit into your wall outlet, consult an electrician and replace the

obsolete outlet.

11) Protect all cables from being walked on. Make sure they do not become pinched,

particularly at their plugs, receptacles and at the points where they exit from the

LCD TV.

12) Never rest objects on the power cord or route it through a high-traffic area. It is

better to use the power cord that is connected to the equipment.

13) Add only attachments and accessories specified by the manufacturer.

14) Use this device only with a cart, stand, tripod, bracket or

table specified by the manufacturer or sold with the LCD TV.

When using the device on a cart, use caution to avoid injury

from the cart tipping over.

15) Unplug this LCD TV during lightening storms or when you

are not using it for long periods of time.

16) Refer all service requests to qualified service personnel.

Servicing may be required if the LCD TV has been damaged in any way, such as:

the power cord or plug are damaged; liquid has been spilled or objects have fallen

onto the equipment; the LCD TV has been exposed to rain or moisture; the device

does not operate normally; or the device has been dropped.

1 2 3 4 5 6 7 Next › »

Summary of 22" LCD TVs LTV22HD

Page 1
Warning symbols this symbol alerts you to dangerous voltage and the risk of electrical shock. This symbol identifies important operating and service instructions. Safety instructions 1) read these instructions. 2) keep these instructions. 3) heed all warnings. 4) follow all instructions. 5) do not u...
Page 2
17) do not place the lcd tv where it may be dripped or splashed on, or where objects filled with liquid will be placed near it. 18) the shock hazard marking and associated graphical symbol are provided on the back panel of unit. 19) this product is for entertainment only. Visual display tasks are ex...
Page 3: Contents
Contents accessories................................................................................................................. 1 front panel buttons ................................................................................................ 2 back panel buttons..............................
Page 4: Accessories
1 accessories thank you for purchasing this high-performance lcd-tv! This package comes with: lcd tv user’s guide warranty card remote control two aa batteries* power cord vga cable rca a/v cable * batteries shall not be exposed to excessive heat such as sunshine, fire or the like..
Page 5: Front Panel Buttons
2 front panel buttons volume down (adjust decreases) volume up (adjust increases) on-screen display (osd) menu button (returns to the previous menu) scroll down (selects the next channel down) scroll up (selects the next channel up) input source selection (serves as the enter button) power on and of...
Page 6: Back Panel Buttons
3 back panel buttons a b c d e f g h i j k a power receptacle (for ac input) b headphone jack c pc audio input d vga (15-pin) signal input from a computer e ypbpr and high definition (hd) component video input f s-video input g ypbpr/ dvi signal audio input (left/right) h av/ s-video signal audio in...
Page 7: Remote Control
4 remote control.
Page 8
5 remote control button function as follows: 1 input selects input source 2 enter confirm selection or enter selected menu 3 tv switches to tv from any other source 4 - vol + adjusts the volume up and down 5 list select channel from program list 6 guide select electronic program guide (epg) 7 0~9, -...
Page 9: Installation
6 installation connecting an rf antenna or to cable tv make sure the power is off before installing your lcd tv. 1) air tv: connect the lcd tv to tv antenna with 75-ohm coaxial cable. Preset the air tv channels into memory with auto scan function when using an antenna tv system. This air input jack ...
Page 10
7 2) connecting the s-video cable: 3) connecting the ypbpr cable: 4) connecting the hdmi cable: vcd or dvd player audio cable (not supplied) vcd or dvd player audio cable (not supplied) hdmi cable (not supplied) s-video cable (not supplied) ypbpr cable (not supplied) vcd or dvd player (dvd player sh...
Page 11
8 5) connecting the hdmi to dvi cable: connecting to the headphone connect the headphone to the headphone output terminal of the lcd tv. (headphone sold separately). Connecting to a computer 1) connecting the vga (15-pin d-sub): connect the vga cable from vga output on the computer to the vga termin...
Page 12
9 2) connecting the hdmi-dvi cable: connect the hdmi-dvi cable from the computer’s dvi output to the lcd tv’s hdmi terminal input. Connect the green end of the audio-in cable from the audio output on your computer to the audio input terminal (red/white) on the lcd tv. Connecting the power cord conne...
Page 13: Basic Operations
10 basic operations to select input source, change channels, and adjust volume, use the tv remote control or the front panel controls. Before using the lcd tv connect all external equipment properly. Connect the power cord. The power led indicator lights orange. Turning the power on and off press po...
Page 14
11 electronic program guide (epg) press the guide button on the remote control and the program information for the channel you are watching will be displayed on the screen. * the picture here shows an example of the guide screen in a dtv source. Selecting a channel press number key or ▼ch▲ button to...
Page 15
12 favorite channels press fav button to show favorite list and select your favorite channels that have already been stored. (you need to preset the favorite channels from the osd menu to enable this function.) setting the sleep time repeatedly press sleep button to set the off timer. The function i...
Page 16
13 advanced operations using the osd menu use the osd menu to adjust various settings for your lcd tv. Press menu to display the osd menu. Press ◄ or ► to select the desired osd menu page. Picture menu —to adjust the picture quality in tv, av, s-video, ypbpr, hdmi source: note: when in av, s-video, ...
Page 17
14 brightness: to adjust luminance of video. (right: max, left: min.) sharpness: to adjust picture sharpness. (right: sharper, left: softer.) tint: to adjust tint level. Color: to adjust color. (right: brilliant color, left: pale color.) advance: to adjust advanced d-sub functions, press ► to enter....
Page 18
15 in atv, av, s-video, ypbpr, hdmi, d-sub source: bass: to adjust bass. Treble: to adjust the treble. Balance: to adjust left and right audio balance. Audio language: to select the available audio languages. (only enabled in dtv mode) time menu —to set up time zone it is only active in tv source. T...
Page 19
16 option menu —to set up osd window in tv, av, s-video source: in ypbpr, hdmi, d-sub source: osd language: to select an osd language from english, french or spanish. Osd timer: to setup the display time of osd. (5, 10, 15, 25, 40, and 60 seconds).
Page 20
17 closed caption: to set close caption options. Cc mode: to select closed caption mode from off, on, or cc on mute. Basic selection: to set basic analog closed caption options. (cc1~cc4, text1~text4) advanced selection: to select closed caption signal formats and set up caption modes for digital tv...
Page 21
18 parent menu —to set up parental control in tv, av, s-video, ypbpr, hdmi source: enter password: enter password and the screen below will show. (the default password is 0000.) change password: to change the password, press ►, and the screen on the right appears. Follow the instructions to change p...
Page 22
19 us: press ► to set tv or mpaa ratings. Tv: to adjust tv blocking level in the us. You can select between tv-y, tv-y7, tv-g, tv-pg, tv-14, or tv-ma. The tv ratings in the us are defined as following. Tv-y all children tv-pg parental guidance suggested tv-y7 directed to older children: this program...
Page 23
20 canada: press ► to set canadian english and french ratings. Canada eng: to adjust blocking level in english-speaking region of canada. You can select between e, c, c8+, g, pg, 14+, 18+. The canadian english ratings are defined as following. E exempt pg parental guidance c children 14+ viewers 14 ...
Page 24
21 note: this picture is an example of the content of rrt setting. However, the selections and sub-selections of rrt setting may be different in your osd menu according to the local broadcasting system. Reset rrt: press ► to reset rrt setting. Tv menu —to set up for tv it is only active in tv source...
Page 25
22 show/hide ch.: press enter to skip the selected channel. To restore the channel, press enter again. Channel name: press ► to edit a name for the current channel. Use ▲▼ to choose letters or signs, ◄► to move forward or backward, and then press menu or enter to exit..
Page 26: Technical Specification
23 technical specification type 21.6” tft active matrix 0.27675 (h) x 0.27675 (v) pixel pitch color filter rgb vertical stripe lcd glass surface anti-glare rgb rgb analog (0.7/1.0 vp-p, 75 ohms) separate sync, fh: 30-82 khz, fv:50-75 hz rf tv system antenna / ntsc+atsc tv cable system / catv + digit...
Page 27: Safety Precautions
24 safety precautions this lcd tv is manufactured and tested based on the fundamental principle that a user's safety comes first. However, improper use or installation may result in danger to the lcd tv as well as to the user. Carefully go over the following warnings before installation and keep thi...
Page 28: Care And Maintenance
25 care and maintenance care avoid exposing the lcd tv directly to sunlight or any other heat source. Install the lcd tv away from the sunlight to reduce glare. Install the lcd tv in a well ventilated area. Do not place anything heavy on top of your lcd tv. Make certain your lcd tv is installed in a...