VAC Phi Alpha Musicbloc I60 Instructions Manual

Summary of Phi Alpha Musicbloc I60

  • Page 1

    Valve amplification company phi alpha musicbloc 160 monoblock tube amplifier instructions manual issued 12 march 2008 please read carefully before installing copyright 2008 by valve amplification company. All rights reserved..

  • Page 2

    Page 2 welcome congratulations on your purchase of the vac phi alpha musicbloc 160, and welcome to the family of vac owners! Your vac is designed not to the latest fad but to substance, providing the highest quality of sound. Time spent familiarizing yourself with this manual will be well rewarded. ...

  • Page 3

    Page 3 general precautions & safety notes 1. Vacuum tubes become hot enough to cause serious burns. Never touch a tube when the unit is on. It may take several minutes for the tubes to cool down after the unit is switched off. Install this amplifier in such a way that people, pets, and flammable mat...

  • Page 4

    Page 4 installation physical requirements: 1) provide adequate ventilation-allow at least three inches of free air space above and two inches to either side of amplifier 2) do not place the amplifier in a completely enclosed cabinet. If equipment cabinet has a solid front door, a “boxer” fan will be...

  • Page 5

    Page 5 basic hookup: 1) connect a volume-controlled line-level source to either the input rca connector for ‘single- ended’ sources or the input xlr connector for balanced sources. Set the front switch to reflect the connection used. 2) connect loudspeaker cables to the five-way binding posts on the...

  • Page 6

    Page 6 output tube bias adjustment: your amplifier has been shipped with the output tube bias properly set. Nonetheless, it should be checked when you install your amplifier and approximately once every month thereafter. It must also be adjusted each time a tube is replaced. Adjustment of the output...

  • Page 7

    Page 7 matching to your loudspeakers like many modern tube amplifiers, the phi alpha musicbloc 160 includes multiple match taps for the speaker outputs. Do not assume that the setting which corresponds to your speakers’ published impedance specification will yield the best sound. Due to the various ...

  • Page 8

    Page 8 general information about tubes it is true that each brand of tube sounds different in a particular high resolution circuit. This is because no two manufacturers make a tube type in quite the same way, and the central tendencies of the performance parameters will differ slightly with each mak...

  • Page 9

    Page 9.

  • Page 10

    Warranty your equipment is warranted for a period of thirty (30) days from the date of purchase. In addition, if the registration form is received by vac along with a copy of your sales receipt from an authorized vac dealer within this thirty days, a service contract will be extended to cover your e...

  • Page 11

    Vac phi alpha musicbloc 160 registration form mail to vac soon as possible. Name ______________________________________________________________ address ______________________________________________________________ ______________________________________________________________ telephone ______/_____...