Valve amplification company vac standard preamplifier mk ii instructions manual issued - 3 march 2006 please read carefully before installing copyright 2006 by valve amplification company. All rights reserved..
Page 2 welcome congratulations on your purchase of the vac standard mk ii preamplifier, and welcome to the family of vac owners! Your vac is designed not to the latest fad but to substance, providing the highest quality of sound. Time spent familiarizing yourself with this manual will be well reward...
Page 3 general precautions & safety notes 1. Dangerous voltages exist within the chassis. Do not remove chassis cover until unit has been switched off and unplugged from the wall outlet (power) and all components for 15 minutes. Tubes become hot in use, and can cause injury. Do not expose chassis to...
Page 4 installing the standard mk ii preamplifier physical requirements: 1) provide adequate ventilation. 2) the chassis cover will become warm during normal use. 3) this component must be installed in a secure, properly built (and ventilated) stand, cabinet or enclosure. It could inflict serious in...
Page 5 operating the standard mk ii preamplifier front panel controls: although most of the front panel controls (volume, power, mute) are self explanatory, vac has outfitted this unit with several advanced features which bear further description: phono section mm (option): when fitted, input “l6" w...
Page 6 condition is attained. Remote control the remote control allows for wireless adjustment of “mute” and “volume”. The remote wand is powered by two “aaa” batteries. These should be of the alkaline type. You will need to install them in the wand before using the remote. Since batteries can leak,...
Page 7 maintenance chassis care: although your vac chassis and faceplate are extremely durable, their finish can be scratched, chipped or damaged if improperly treated. Cleaning with a soft, damp cloth while the amplifier is switched off and unplugged should restore the finish to its original lustre...
Page 8 general information about tubes it is a truth that each brand of tube sounds different in a particular high resolution circuit. This is because no two manufacturers make a tube type in quite the same way, and the central tendencies of the performance parameters will differ slightly with each ...
Page 9 vac standard mk ii preamplifier specifications (typical) type: vacuum tube line stage with external power supply and home theater (direct power amplifier) mode. Options: remote control for volume & mute dedicated mm phono input dedicated mc phono input line stage preamplifier: gain: 24 db max...
Standard mk ii preamplifier registration mail to vac soon as possible. Name ______________________________________________________________ address ______________________________________________________________ ______________________________________________________________ telephone ______/______-___...
