Vacmaster PRO200 Quick Start Manual & User Manual - How to Make A Bag
How to Vacuum with Vacuum Bags
1
2
3
5
6
Choose a suitable vacuum bag size,
and place item(s) to be vacuum
packaged in bag.
Allow at least 3 inches of head
space between contents and top of
the bag.
Put the open end of the bag across
the seal bar. Make sure that the
open end is within the vacuum
chamber.
Press the “Start” button, and the following
sequence will occur:
The machine will beep, noting that the process
is complete.
How to Make a Bag
Press the release button to open
the roll storage door.
Insert roll(s).
Pull out the required bag length,
plus 3 inches for head space.
Close lid.
Press the “Seal” button, and the following
sequence will occur:
The machine will beep noting that the
process is complete.
Inspect the seal. A successful seal will look
clear. If the seal is spotty, incomplete,
wrinkled, white or milky, cut the seal and
restart the sealing process.
1
2
3
4
7
8
9
4
Close the lid.
• Lid locks
• Vacuum cycle begins
• Seal cycle starts
• Lid unlocks
7
Take the bag out and inspect the vacuum and
seal. A successful seal will look clear. If the
seal is spotty, incomplete, wrinkled, white,
or milky, cut the seal and restart the vacuum
sealing process.
Cut the roll by sliding the bag
cutter on the lid across the roll.
5
Place one end of the bag across the
seal bar and close the machine lid.
6
• Lid locks
• Seal cycle starts
• Lid unlocks
To vacuum package, follow “How to
Vacuum with Vacuum Bags” section.
10