Vje1650sw / 1600w / 50l vje1650sw wet & dry vacuum cleaner ipx4.
T able of contents section page warranty safety instructions and warnings unpacking and checking carton contents general assembly instructions dry vacuuming operation cartridge filter maintenance troubleshooting thank you for purchasing this vacmaster® vacuum cleaner. With vacmaster® you are obtaini...
3 for your safety carefully read and understand all instructions. W arranty vacmaster® takes pride in producing a high quality, durable product. This vacmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household u...
4 warning: if filters are contaminated or have been used, they must be disposed of properly, prior to performing wet vacuuming operations. This appliance should not be used by persons under the age of 16 or by above and persons with reduced physical, sensory or mental capabilities or lack of experie...
G eneral assembly instructions a philips head screw driver is required. 55 warning: do not plug in power cord to power socket, make sure plug is disconnected before assembling the wet and dry vacuum cleaner. This hepa vacuum cleaner is supplied with a certified hepa filter that has been lot tested b...
6 d ry vacuum operation warning: if filters are contaminated or have been used, they must be disposed of properly, prior to performing wet vacuuming operations. Caution: this vacuum cleaner has been specifically designed to clean up hazardous dust. Special filters reduce the incidence of airborne du...
Vacuuming liquids. 7 w et vacuum operation m aintenance 5. Plug the power cord in to the power outlet. (fig. 5) 6. Turn the motor on by flipping the switch to the “i” position. (fig. 6) 7. Once you have finished vacuuming, flip the switch to the “o” position and unplug the power cord from the power ...
Installation and cleaning. 1 2 3 4 5 8 c artridge filter 1. Ensure that the power cord is disconnected from the outlet. (fig. 1) 2. Disconnect the hose from the tank. (fig. 2) 3. Undo the clasps and remove the top section from the tank. (fig. 3) 4. Clear all dirt or debris from the tank and hose. (f...
1 9 warning: to reduce the risk of electric shock-unplug before troubleshooting. Symptom motor cover emits dust. Wet/dry vacuum will not operate. 1) no power supply. 2) faulty power cord. 3) tank full. 1) check power supply – cord, breakers, fuses. 2) unplug and check the power cord. If damaged, hav...
Dust bags, filters & accessories always available from : cleva-uk.Com vje1650sw.
