Summary of VK1638SWC
Page 1
Vk1638swc / 1600w / 38l vk1638swc wet & dry vacuum cleaner ipx4.
Page 2
T able of contents section page warranty safety instructions and warnings unpacking and checking carton contents general assembly instructions dry vacuuming operation liquid vacuuming operation maintenance installing hepa filter and pre-filter installing & cleaning foam sleeve filter when to change ...
Page 3: Save This Manual
3 for your safety carefully read and understand all instructions. W arranty vacmaster® takes pride in producing a high quality, durable product. This vacmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household u...
Page 4: Warning:
4 warning: if filters are contaminated or have been used, they must be disposed of properly, prior to performing wet vacuuming operations. This appliance should not be used by persons under the age of 16 or by above and persons with reduced physical, sensory or mental capabilities or lack of experie...
Page 5
G eneral assembly instructions a philips head screw driver is required. A l m p q r t s k n o c e d f g i h j b 1 2 3 4 5 7 8 9 10 16 12 14 15 6 p q r r s o o o o q p 11 13 5 5 warning: do not plug in power cord to power socket, make sure plug is disconnected before assembling the wet and dry vacuum...
Page 6: Caution:
6 2 3 8 4 6 7 5 10 1 9 d ry-vacuum operation 11. Place the power head back on the tank, aligning the top section with the and pre-filter. Do not use a dust bag when wet vacuuming. (fig. 13) see page 10 for filter installation. Latches, and hook the latches. (fig. 14) 12. Insert the locking end of th...
Page 7
7 1. Verify that the power cord is disconnected from the power socket. (fig. 1) 2. In order to prepare your vacuum cleaner for dry vacuuming, verify that the hepa filter is securely mounted. With power head removed and in the upside down position, make sure the filter is pushed in until it stops aga...
Page 8
2 3 5 6 1 4 8 l iquid vacuum operation 1. Verify that the power cord is disconnected from the power socket. Verify that the tank is clean and free of dust and dirt. (fig. 1) 2. Remove all filters and dispose of properly. 3. Rinse out the inside of tank to remove any loose debris and dispose of liqui...
Page 9
1 6 7 1 5 2 4 on off 3 2 3 4 5 1 6 9 m aintenance i nstalling hepa filter and pre-filter warning: always disconnect the plug from the power socket before removing the power head from the container. 1. Verify that the power cord is disconnected from the power socket. (fig. 1) 2. Disconnect the hose f...
Page 10
5 2 4 3 1 10 installing foam sleeve filter 1. Verify that the power cord is disconnected from the power socket. (fig. 1) 2. Remove power head and place in an upside down position. Follow instructions to remove cloth filter. 3. Carefully slide foam sleeve filter down over the filter cage making sure ...
Page 11
Dust bags, filters & accessories always available from : cleva-uk.Com vk1638swc.