Wet/dry vacuums operator’s manual model no. Vmvq1220ss for your safety read and understand this manual before use keep this manual for future reference ip24.
2 section page thank you for purchasing this vacmaster ® wet/dry vacuum cleaner. Feel confident that with vacmaster ® you are obtaining a high quality product engineered for optimal performance. This vacuum is capable of picking up liquids and dry materials. For your safety: carefully read and under...
3 save this manual for future reference. When using an electrical appliance, basic precautions should always be followed including the following: warning: to reduce the risk of fire, electric shock or injury: • do notrun vac unattended. • do not vacuum, or use this wet/dry vac near flammable liquids...
4 this wet/dry vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for servicing double-insulated wet/dry vacs before servicing. Use this wet/dry vac as described in this manual. Observe the following warnings th...
5 remove entire contents from carton. Check each item against the contents list. Contents list key description……………………..…….…qty a vac assembly…………………………….. B hose …………………………….............. C extension wands..……………………..... D floor nozzle……………………..... E crevice tool……………………………… f foam sleeve filter......
6 a philips head screw driver is required for assembly. Warning : do not plug in power cord to power outlet, make sure plug is disconnected before assembling the wet/dry vac unpacking your wet/dry vacuum & general assembly 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2. Und...
7 dry vacuuming warning: be sure to read, understand, and apply information, entitled ‘safety instructions & warnings’. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to; lighter fluid, solvent type cleaners, ...
8 o = off i = on do not use the cloth filter for liquid vacuuming do not use collection bag for liquid vacuuming liquid vacuuming warning: be sure to read, understand, and apply information, entitled ‘safety instructions & warnings’. Do not vacuum in areas with flammable gases, vapors, or explosive ...
9 remember! The foam filter must be removed after wet vacuuming, and a cloth filter must be installed before dry vacuuming again. This wet/dry vac has blowing capabilities. To use the blower feature follow the instructions listed. Warning: always wear safety goggles complying with australian standar...
10 2. Disconnect the hose from the vacuum, turning large end in counter clockwise direction. (fig.2) 3. Undo the latches and remove the power head from the container. (fig.3) 4. Clear all dirt or debris from the container and hose. (fig.4) 5. Check the hose, attachments, and power cord to verify tha...
11 installing foam sleeve filter 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2. Remove power head and place in upside down position. Follow instructions to remove cloth filter. 3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is co...
12 parts list - exploded view.
13.
