- DL manuals
- Vacmaster
- Vacuum Cleaner
- VSB1801NA
- Use & Care Manual
Vacmaster VSB1801NA Use & Care Manual
Summary of VSB1801NA
Page 1
Www.Vacmaster.Com cleva north america, inc. Greenville, sc 29607 conforms to ul standard ul1017 certified to csa std made in china use & care guide model no.Vsb1801na 18v 2-in-1 cordless swivel -stick™ vacuum (866) 384-8432 c22.2 no.243.
Page 2: Table of Contents
-2- section important safety instructions ...................................................................................................................3 warranty........................................................................................................................................
Page 3: Warning -
-3- important safety instructions when using an electrical appliance, basic precautions should always be followed, including the following: read all instructions before using this vacuum cleaner. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury...
Page 4
-4- 14. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to hand vacuum, picking up or carrying the appliance. 15. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire...
Page 5: Note:
-5- note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c...
Page 6: Product Disposal
-6- product disposal this product contains an internal lithium-ion battery pack formulated from environmentally sensitive materials. This product must be disposed of properly with due care for the environment. Do not dispose of product with household garbage. Consult your local waste authority for i...
Page 7: Technical Specs
-7- for one year from the date of sale, this product is warranted against defects in material or workmanship when it is assembled, operated and maintained according to all supplied instructions. With proof of sale, a defective appliance will be replaced free of charge. For warranty coverage details ...
Page 8: Replacement Parts
-8- combo accessory tool handle power button speed shift button hand vacuum release button battery charge indicator led headlights nozzle release button motorized brush powerhead screw main body charging adapter on-board storage clip dust cup release button hand vacuum on/off button filter filter ba...
Page 9: Assembly Instructions:
-9- general assembly instructions assembly instructions: 1) fit the end of the main body onto the neck of the motorized powerhead and click into place. 2) insert the handle into the top of the main body and fix in position with the supplied locking screw. Note: do not over-tighten. Use only hand too...
Page 10
-10- 4) insert vacuum support into charging base and lock into place. 5) insert the charging adapter into the charging port on the side of charging base. 6) plug the adapter into a wall outlet. Note: use only the charger supplied with your cleaner to recharge. 7) insert on-board storage clip onto ha...
Page 11: Charging Instructions:
-11- 1) before charging, make sure unit is off. Insert the vacuum cleaner onto the charger as shown. Make sure the charging adapter is plugged into an outlet. 2) the battery indicator will show the progress of the charge. While the vacuum is being charged, the battery charge indicator will be flashi...
Page 12: Operating
-12- operating instructions using your vacuum cleaner: once vacuum cleaner is charged, lift off the charging base. 1) to start the vacuum, push the power button. The vacuum automatically starts in the high speed position. 2) to switch the speed to low, push the speed shift button. Press this button ...
Page 13: Caution
-13- 3) to clean difficult to reach areas, use the crevice tool or dusting brush by inserting the end of the tool into the hand vacuum. Caution moving parts! To reduce the risk of personal injury, do not touch the brush roll when vacuum is on. Contacting the brush roll while it is rotating can cut o...
Page 14: Maintaining Your Vacuum
-14- maintaining your vacuum caution to reduce the risk of shock, remove vacuum cleaner from the charging base, and turn off before performing any service or maintenance. Emptying the dust container & cleaning the filter 1) remove the hand vacuum from the main body by pressing the release button. 2)...
Page 15: Important:
-15- important: the filter, foam and basket must be completely dry before reuse. 6) insert the clean and dry foam along with the filter into the basket. Fit the basket into the dust cup and reconnect the dust cup to the hand vacuum. 3) lift the brush roll out of the housing. Clean off debris and any...
Page 16: Note:
-16- 5) lock the brush in place by sliding the tab in the direction of the arrow. To remove powerhead blockages: 1) to clean out the powerhead, press the nozzle release button and pull the powerhead away from the main vacuum body. 2) carefully remove any debris or blockage from the inside of the pow...
Page 17: Troubleshooting
-17- troubleshooting should you have any problem(s) with your vacuum cleaner, review the table below for solutions to minor performance issues. Warning disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal inju...
Page 18
-18- motorized brush not turning. Brush roll is jammed. Remove obstruction. Follow instructions on page 15 and 16. Brush roll needs to be reset. Turn the unit off and remove the obstruction, then turn back on. Brush roll is not installed well. Remove brush roll and reinstall following instructions o...