Vacon optc3 User Manual

Manual is about: profibus dp option board

Summary of optc3

  • Page 1

    Vacon nx ac drives optc3/c5 profibus dp option board user manual ®.

  • Page 3

    “ ”.

  • Page 10

    11685_uk.

  • Page 11

    1 2 3 4 5 bus connector interface board connector 11686_uk.

  • Page 12

    A) b) c) 1 x1 11688_00 jumper x1 cable shield is connected directly to pe cable shield is connected to pe through rc 11689_00 x14 jumper x14, upper row jumper x14, lower row gnd connected to cable shield cable shield connected to pe through rc cable shield connected directly to pe cable shield is no...

  • Page 13

    2 3.

  • Page 14

    4 5 r g.

  • Page 15

    1 x1 11688_00 jumper x1 cable shield is connected directly to pe cable shield is connected to pe through rc profibus cable profibus cable profibus cable a b c.

  • Page 16

    11689_00 x14 jumper x14, upper row jumper x14, lower row gnd connected to cable shield cable shield connected to pe through rc cable shield connected directly to pe cable shield is not connected gnd not connected to cable shield 2.

  • Page 17

    Profibus cable profibus cable profibus cable.

  • Page 18

    11687_uk 1 2 3 4 5 9 8 7 6 bus connector interface board connector 5 9 8 7 6 4 3 2 1.

  • Page 21

    X6 11690_00 jumper x6, termination resistor bus termination on bus termination off 11691_00 x13 jumper x13, termination resistor bus termination on bus termination off.

  • Page 22

    X x6 1 red yellow green 11692_00 11693_00 ps bs fs.

  • Page 24

    ! Note x6 x1 1 2 3 4 5.

  • Page 26

    Expander board g1 è g5 ready i/oter m nxoptc5 ready i/oter m g1 è g2 slave address ready i/oter m 126 enter change value confirm change parameters ready i/oter m p1 è p4 slave address ready i/oter m 126.

  • Page 27

    Monitor ready i/oter m v1 è v1 profibus status ready i/oter m 2516.0 message counter profibus status.

  • Page 29

    Profibus master profibus slave protocol trailer protocol header protocol header protocol trailer output data input data.

  • Page 30

    Value parameter value.

  • Page 31

    Ac drive profibus board controlword p r o fibu s m a s te r reference 1 processdata 1 processdata statusword actual value 1 process processdata 8 a p p lica tio n.

  • Page 36

    Profibus dp m a ster pd1 pd2 pd3 pd4 pd5 pd6 pd7 pd8 vaco n n x 1 output frequency 2 motor speed . . . Selector parameter or fixed variable n xb1.

  • Page 37

    Ac drive profibus board id p r o fibu s m a s te r ind value id ind value a p p lica tio n read/write from drive answer from drive.

  • Page 43

    #profibus_dp gsd_revision = 1 vendor_name = "vaasa control" model_name = "vacon nx" revision = "1.0" ident_number = 0x9500 protocol_ident = 0 station_type = 0 fms_supp = 0 hardware_release = "hw1.0" software_release = "sw1.0" 9.6_supp = 1 19.2_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5m...

  • Page 46

    Document id: rev. B sales code: doc-optc3/c5+dluk vacon ltd member of the danfoss group runsorintie 7 65380 vaasa finland www.Danfoss.Com.