X5opt01 115 vac encoder interface option board installation manual dpd00113.
Need help? This manual answers most installation and startup questions that may arise. However, if you have any problems, please let your first call be to us. Vacon, inc. Chambersburg, pa 17202 normal business hours: (north america) 8:00 am to 5:00 pm, eastern time +1 877-vacon06 (+1 877-822-6606) a...
X 5opt01 115 vac / encoder interface option board vacon 3 email: usa@vacon.Com • fax 717-264-3115 installing the x5opt01 115 vac / encoder interface option board introduction the x5opt01 provides the option of controlling x5 ac drives from 115 vac control signals, or to connect a shaft- mounted enco...
4 vacon x 5opt01 115 vac / encoder interface option board 24-hour support 1-877-822-6606 installation procedures figure 1 on page 5 illustrates the option board and the location of the terminals and the power supply selector. Warning sensitive equipment this assembly contains static-sensitive compon...
X 5opt01 115 vac / encoder interface option board vacon 5 email: usa@vacon.Com • fax 717-264-3115 figure 1: option board layout before you can install the option board, you must first remove the drive cover. Figure 2 shows the locations of the cover screws. The torque range for the x5 size 1 cover i...
6 vacon x 5opt01 115 vac / encoder interface option board 24-hour support 1-877-822-6606 the option board is installed just above the control board in all configurations (a size 1 unit is shown in figure 3 for reference). The screws labeled “a” must be removed from the drive unit; those labeled “b” ...
X 5opt01 115 vac / encoder interface option board vacon 7 email: usa@vacon.Com • fax 717-264-3115 115 vac interface / relay / encoder interface terminals figure 5: 115 vac interface / encoder terminals the x5opt01 option kit includes five 115 vac inputs, two additional programmable relays, and an en...
8 vacon x 5opt01 115 vac / encoder interface option board 24-hour support 1-877-822-6606 specifications for encoder / 115 vac interface setup and use the encoder interface is most effective if used in conjunction with the vector mode of operation. Refer to chapter 6 of the x5 user’s manual for detai...
X 5opt01 115 vac / encoder interface option board vacon 9 email: usa@vacon.Com • fax 717-264-3115 the encoder interface can easily serve as one of the inputs to the x5’s keeper function (data logging). More information on this feature is in the x5 user’s manual. Both the vmet and imet output from th...
Finland helsinki vacon plc Äyritie 8 01510 vantaa telephone: +358 (0)201 212 600 fax: +358 (0)201 212 699 tampere vacon plc vehnämyllynkatu 18 33580 tampere telephone: +358 (0)201 2121 fax: +358 (0)201 212 750 australia vacon pacific pty ltd 5/66-74, micro circuit dandenong south, vic 3175 telephone...
