1. DL manuals
  2. Vacron
  3. Security System
  4. SA-650-3G
  5. User Manual

Vacron SA-650-3G User Manual

Manual is about: Vehicle 4-CH DVR System, 3G Module/Without 3G Module

Summary of SA-650-3G

  • Page 1

    Vehicle 4-ch dvr system user manual 2011 nov v1.2.2 optional 3g module without 3g module.

  • Page 2: Index

    I index a. Product features ................................................................................................. 1 b. Specification ......................................................................................................... 2 c. Product appearance ............................

  • Page 3: A. Product Features

    1 a. Product features max. Up to 4 ch vehicle cameras, can take record for inside and outside the vehicle. Video output for live view, playback with monitor. H.264 compression format. Recording format：d1 and cif. Build-in single channel microphone. Quick search overall event log. The full recording ...

  • Page 4: B. Specification

    2 b. Specification item description video format ntsc pal video input 4ch input bnc/ harness connector audio input 1ch input / harness connector video output 1ch output bnc / harness connector audio output 1ch output rca / harness connector alarm input 4 alarm input alarm output buzzer display mode ...

  • Page 5: C. Product Appearance

    3 c. Product appearance front panel rear panel type1: without 3g module cf 1 power indicator led gps indicator led(cf2) record indicator led(cf1) extending ir lead ir receiver cf 2 video input video output audio output usb gps(optional) power input dc 8-28v harness connector alarm input audio input...

  • Page 6

    4 type2: build-in 3g module type3: with 3g usb dongle dimension ( unit: mm ) 3g module 3g usb module.

  • Page 7

    5 d. Record / stop-record 1. Power on / record turn on the power, and it will take approximately 40 seconds to boot up. During the recorder booting up, the cf card indicator led will start flashing as the recording is in progress. Light indicator : ● red light: light on, means power on; light off, m...

  • Page 8: E. System

    6 e. System operating instruction vehicle dvr system provides two operational methods: ir remote controller and pc software application. 1. Through ir remote controller instruction 1.1 as following is the key mapping table for ir remote controller: 1.2 dvr osd menu operation and ir remote controller...

  • Page 9

    7 ◆ ir remote controller instruction (1) select item: [up/down/left/right] (2) change setting for selected item: [up/down/left/right] (3) change setting for bar item：[enter] (4) full screen display for each ch: [ch1~ch4] (5) open osd menu, back to previous page：[menu] (6) quad display ：[quad] (7) en...

  • Page 10

    8 (2) left/right key→ set brightness/contrast/hue for current channel (left key→ to reduce)/ (right key→ to increase) item setting (1) brightness: (left key→ to reduce)/ (right key→ to increase) (2) contrast: (left key→ to reduce)/ (right key→ to increase) (3) hue: (left key→ to reduce hue)/ (right ...

  • Page 11

    9 (5) delete all record data (format disk) (1) delete all record data use right key or left key to select the selection then click “enter” to confirm. ★caution! All data will be deleted when you click “yes”. (6) default live view channel display (1) select the default live view ch after startup: ite...

  • Page 12

    10 (8) firmware update (1) during firmware update, please do not power off; after finished the dvr will reboot automatically. (2) when update firmware, using left/right button on remoter controller to select yes/no for update, then press enter button to confirm. ★ must use cf card for firmware updat...

  • Page 13

    11 (11) 3g networking setting (only available when dvr with specific 3g module) (1) when enable the 3g networking function, press the right/left key on remote controller first to select 3g on/off, then press “confirm” key to save the change. ★ after setup finished, press the up/down key to check inf...

  • Page 14

    12 (13) password setting (3g version without this function) (1) set password protected on machine： it required to enter the password before setting, playback, formatting… implement relevant actions. (2) use remote controller keys to change setting, click left key to move one space for selecting numb...

  • Page 15

    13 live display (1) select ch1~ch4 to full display mode; if you want to return to quad display, please press quad key. (2) on live view mode, click “menu’ to enter osd menu or click ‘play” to enter playback mode. ★ if it shows the “g” mark on upper right screen, it means gps positioning successes. P...

  • Page 16

    14 2. Through carbox player on pc site (1) use cf card to playback directly execute the carbox2.Exe from cd-rom , the display as showing below. Click play button to select memory card; or click open file to choose the files from memory card or hard disk, and then double-click the file you want to pl...

  • Page 17

    15 1 previous file 2 previous frame 3 backward play 4 pause 5 stop 6 play 7 next frame 8 next file 9 open folder, select file. 10 disk backup. Select the backup path for file storage. 11 google map 12 configuration 13 snapshot 14 tool, cf card format, language setting. Hard disk backup review footag...

  • Page 18

    16 step 1. Select the cf card drive no. Step 2. Select the recorded file which you want to backup step 3. Select the backup format backup format: (1)original cf card format backup. Xxxx*.Sd file (2)avi file(*.Avi) backup when take this format as backup. Chn01 for front view camera image file, file t...

  • Page 19

    17 step 5. Backup: click ‘backup’ to start saving the file to your specified destination configuration before using the machine, please insert the cf card to card reader and connect to the pc to start setting. After setting, you can insert the card back to dvr and start recording. 1 video quality se...

  • Page 20

    18 5 audio recording audio recording on or off. 6 password this function can encrypt the data and prevent others from accessing. Maximum letters:15 letters. Example: 123456789123456 after setting the password up, you have to input password every time for playing the files, modify the setting, format...

  • Page 21

    19 snapshot while playing the recorded file, you can use this function to snapshot the picture and save it into your pc. Default saving path for snapshot picture will be in x:\iboxplayer/snapshot folder. File type: .Bmp b. Latitude & longitude coordinates c. G sensor when detecting extraordinary g-f...

  • Page 22

    20 e. Video search & play speed (1) video searching : you can use the mouse to drag the bar to search the video quickly. (2) play speed : support 2x, 4x fast forwarding and -2x, -4x slow play mode. F. Volume control volume bar: click the left button of mouse control to adjust the volume degree. (2) ...

  • Page 23

    21 note: to perform this software will require directx 9.0 or more. Click and then select the name of vehicle to view the image (example, the figure of 175) then click on channel-01 (or other channel) and then hold down the left mouse button and drag to the split screen in right side. The other meth...

  • Page 24

    22 click can watch the event log and vehicle driving records... Click can watch the google map and inquiry the date and time record of the vehicle…...

  • Page 25: F.  Format Memory Card

    23 3g clientapp page and other relevant settings 1. Login: click login on the top of the screen to open the login screen information. 2. Add device: in order to identify each device, add the vehicle information here. 3. Style: watch different split-screen, just click style option to set values; tota...

  • Page 26

    24 a. B. C. D..

  • Page 27: G. Restoring Memory Card

    25 5. After formatting completed, re-insert the cf card to do relative setting. Please insert the card into dvr for recording. █ process to format the cf card on dvr: 1. Use remote controller to enter dvr menu and choose delete all the record data(format disk). 2. Select “yes” and click “enter’’ to ...

  • Page 28

    26 3. Execute the player “carbox2.Exe” into main page(refer to the charts below ) 4. Select restore button to start as following steps a. B. C..

  • Page 29

    27 5. You can use the memory card for other purposes. D. E. F..

  • Page 30

    28 h. 3g-sim card setting (with 3g module) when use sim card in our device, please pay attention to disable the pim code protection feature first. How to turn off the pin code protection? 1. Using huawei 3g module and then plug the sim card into pci-e board first. Second, use usb cable to connect pc...

  • Page 31

    29 4. Confirm entering correct pin code and then complete the cancellation pin code function. 5. After completing above procedure, huawei 3g module and sim card on our pci-e board could connect to 3g system well. ★ unplug the usb cable and replace the original wiring connected to pci-e board. At thi...

  • Page 32

    30 i. 3g config tool updated (with 3g module) 1. Click icon to open setup page. 2. Connect the usb flash drive into your computer's usb port and then select the drive location, enter as following information..

  • Page 33

    31 3. Click “ok” button to save data after whole information entered, and then the 3g module information setting is completed. Click the usb drive to view the file already exists. (file name is net3g.Ncf) 4. Insert the usb drive into the dvr usb port, and then reconnect the power to reboot the machi...

  • Page 34

    32 setup page description 1. Username: user name ( no setting recommend in this function) 2. Password: password ( no setting recommend in this function) 3. Server address: set ip address for back-end site (generally, the default setting as back-end testing for factory) 4. Server port: setup for 3g i...

  • Page 35: Record Mode With 8Gb Card)

    33 j. Record time estimation (based on constant record mode with 8gb card) ＊ the chart of estimated record time listed below is for reference only(based on 8gb with 2 inner &2 exterior cameras). The length of time recorded can be varied due to different record condition. Unit: hr resolution/ fps vid...